

ESP32C3
- Size
- 29.6 × 43.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 72
- Pads
- 205
- Tracks, vias
- 52, 42
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Mar 2026
- Updated
- 27 Mar 2026
Overview
ESP32C3 is an open-source printed circuit board by rajeev2705, from the rajeev2705/PCB_Projects-27- repository on GitHub. It is a 4-layer board of 29.6 × 43.2 mm with 60 parts on 72 nets, routed with 52 tracks and 42 vias.
It is built around the ESP32-S3FN8 and LM324. Its parts include 23 capacitors, 20 resistors, 7 diodes, 3 ICs and 2 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2ESP32-S3FN8
QFN-56-EP(7x7)Watchdog reset、Software reset、Built-in general-purpose timer、Built-in temperature sensor、Touch function、True random number generator (TRNG)、Storage encryption、Infrared remote control QFN-56-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSEspressif SystemsMicrocontrollers (MCU/MPU/SOC)LM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational Amplifier
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6, R7, R8, R15, R16, R17, R18, R19, R20, R27 |
| 6 | 0.1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C7, C11, C12, C17, C18 |
| 5 | 1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C8, C14, C26, C27 |
| 4 | 1N4148 | Diode_SMD:D_SMA | D3, D4, D5, D6 |
| 3 | 100nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C23, C25 |
| 3 | 10uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C6, C15 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R13 |
| 2 | 10pf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 4.7uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21, C24 |
| 1 | 0R | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R26 |
| 1 | 1.2pf | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C10 |
| 1 | 1.8pf | Capacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C13 |
| 1 | 15k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 2.4nH | Inductor_SMD:L_0201_0603Metric_Pad0.64x0.40mm_HandSolder | L2 |
| 1 | 499R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 6.8k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 600 Ω @ 100 MHz >500mA | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | Antenna_Chip | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | Conn_01x02_Pin | Connector_Molex:Molex_Micro-Fit_3.0_43650-0212_1x02-1MP_P3.00mm_Horizontal | J2 |
| 1 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D7 |
| 1 | ESD5Zxx | Diode_SMD:D_SOD-523 | D1 |
| 1 | ESP32-S3FN8 | Semiconductors:QFN40P700X700X90-57N | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D8 |
| 1 | LM324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_FSMSM | SW1 |
| 1 | upto 40 Mhz =+-10ppm | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | ~ | Power_Supply_user:Power_Suply_User | U2 |
More from rajeev2705/PCB_Projects-27-
3- 4 layers105.4 × 57.5 mm

- 2 layers

- 2 layers42.9 × 31.7 mm

Similar boards
- 4 layers30 × 23.5 mm

NIMRS-21Pin Decoder
CDFER/NIMRS-21Pin-Decoder
An open source 21-Pin DCC Decoder for model trains
89 parts21 - 2 layers165.1 × 132.1 mm

- 4 layers35.5 × 14.7 mm

- 2 layers52 × 18 mm

ESP32-S3-Stick
JosueAGtz/ESP32-S3-Stick
ESP32-S3 is a dual-core XTensa LX7 MCU, capable of running at 240 MHz. Apart from its 512 KB of internal SRAM, it also comes with integrated 2.4 GHz, 802.11 b/g/n Wi-Fi and Bluetooth 5 (LE) connectivity that provides…
58 parts8 - 4 layers24 × 75 mm

The guesser
Mines-Rocketry-Club/flight-computers
Fully open source high power rocketry flight computers.
117 parts7GPL-3.0 - 2 layers100 × 75 mm

Display
DLaxV-Community-Projects-Hub/Open-Shot-Clock
Build your own DIY Shot Clock
209 parts5CERN-OHL-P-2.0 - 2 layers60 × 146.5 mm

- 4 layers99.2 × 94.2 mm

Questions
How big is the ESP32C3 PCB?
It measures 29.6 × 43.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ESP32C3 use?
60 parts, built around the ESP32-S3FN8 and LM324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32C3 KiCad files?
From the rajeev2705/PCB_Projects-27- repository on GitHub, at the commit this page was made from: the board is ESP32C3/ESP32C3.kicad_pcb and its schematic Arduino_UNO_R3/arduino_uno_r3/MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32C3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask rajeev2705 before reusing the design.