Skip to the content
2 layers86.6 × 62.3 mmPCB art, the printed circuit board in 3D

A dog-shaped interactive PCB art keychain with LEDs, buttons, a vibration motor, and a custom outline — made with KiCad.

Size
86.6 × 62.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
7
Pads
31
Tracks, vias
53, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
28 Jun 2025
Updated
31 Oct 2025

Overview

PCB art is an open-source printed circuit board by Rainier-PS, from the Rainier-PS/DogFace-PCB-Art repository on GitHub. It is a 2-layer board of 86.6 × 62.3 mm with 16 parts on 7 nets, routed with 53 tracks and 0 vias.

It is built around the 3362P-1-103. Its parts include 2 resistors and 1 capacitor.

Main components

1

README

README.md

DogFace PCB Art Keychain

DogFace is a custom dog-shaped PCB art keychain that lights up, vibrates, and reacts to button presses. This project is built around fun, interactivity, and portability — all packed into a single board you can hang on your bag, keys, or lanyard.


Features

  • 2 LEDs as glowing eyes
  • 3 buttons:
    • Left eye control
    • Right eye control
    • Mouth "bark" via vibration motor
  • 1 potentiometer to control LED brightness
  • 1 capacitor to protect the motor circuit
  • 5.3 mm keychain hole for easy attachment

Bill of Materials (BoM)

ComponentQuantityNotes
5mm LED2Eyes
Tactile Pushbutton (THT)3Left eye, right eye, motor trigger
Vibration Motor1Tongue effect / "bark" vibration
Potentiometer1LED brightness control
Capacitor1Motor protection (flyback damping)
Resistors2Current limiting
Custom-shaped PCB1Fabricated from this repo’s Gerber files
Breadboard (for testing)1For final circuit checks before soldering
Jumper wires (male–male)10For temporary connections on breadboard

Note on Breadboard and Jumper Wires

Although this is a custom PCB project, I would like to include 1 breadboard and 10 male-to-male jumper wires in the kit to:

  • Validate the full circuit functionality before soldering
  • Test component behavior such as the motor, potentiometer, and transistor
  • Ensure everything works as expected before committing to assembly

This is especially helpful since this is my first PCB project using KiCad.


Screenshots

Schematic

Schematic Schematic

PCB Layout

PCB Layout

3D View

3D View 3D View


Files Included

  • /images/: Schematic, layout, and 3D preview images
  • /production/: Gerber and drill files ready for manufacturing
  • /PCB/: KiCad Schematics and PCB Design
  • This README.md

Slack Username

@Rainier P.S.


Reflections

This is my first-ever PCB project, and I built it completely in KiCad. I challenged myself to combine functionality with personality by making a usable and fun keychain circuit.

What I Learned

  • Creating expressive PCB art using DXF outlines
  • Designing within tight space constraints

Challenges

  • Fitting all components onto the face without breaking the aesthetic
  • Creating custom PCB designs using DXF outlines

Parts

16
QtyValueFootprintReferences
3SW_PushButton_Switch_THT:SW_PUSH_6mm_H9.5mm| , L, R
2LEDLED_THT:LED_D5.0mm^, ^
2Motor_DCTestPoint:TestPoint_Pad_D2.0mmGND, VCC
2RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
13362P-1-1033362P-1-103:TRIM_3362P-1-103<>
1Battery_CellBattery:BatteryHolder_Keystone_3002_1x2032Battery
1CCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
1LOGOpawprint:PawprintG***
1LOGObone:boneG***
1LOGOnose:noseG***

The 15 most common of 16 parts.

Similar boards

  • 2 layers97 × 80 mmPCB B1 V0.1, the printed circuit board in 3D

    PCB B1 V0.1

    praveenraj-rs/Power_Loom

    Project on Power Loom Automation

    24 parts1
  • 2 layers77 × 65.2 mmPhotogate, the printed circuit board in 3D

    Photogate

    MarcioBulla/Cronometro-Optico

    Elaboração completa de um cronometro

    23 partsMIT
  • 2 layers120 × 120 mmWatercooled pi-120mm, the printed circuit board in 3D

    Watercooled pi-120mm

    wiretap-retro/Watercooled-Pi5-Baseboard

    A baseboard for setting up a watercooled Raspberry Pi 5.

    48 partsUnlicense
  • 2 layers80 × 85 mmTachometerkicad, the printed circuit board in 3D

    Tachometerkicad

    UofA-BAJA/2024-2025-Firmware

    The software behind the electrical system in Baja Wildcat Racing.

    29 parts6
  • 2 layers140.5 × 30 mmType e, the printed circuit board in 3D

    Type e

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    16 parts3kApache-2.0
  • 2 layers41.4 × 14.5 mmU2f zero, the printed circuit board in 3D

    U2f zero

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    16 parts2.4k
  • 2 layers122 × 37 mmV0-UmbilicalBoard, the printed circuit board in 3D

    V0-UmbilicalBoard

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    16 parts1.1kGPL-3.0

Questions

How big is the PCB art PCB?

It measures 86.6 × 62.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PCB art use?

16 parts, built around the 3362P-1-103. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PCB art KiCad files?

From the Rainier-PS/DogFace-PCB-Art repository on GitHub, at the commit this page was made from: the board is PCB/PCB art.kicad_pcb and its schematic PCB/PCB art.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PCB art design in my own project?

Its repository states no licence, so its author keeps all rights: ask Rainier-PS before reusing the design.