
PowerBook
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

Hardware component of my rfr16e macropad
RFR-16E is an open-source printed circuit board by rafliard23, from the rafliard23/rfr16e-hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 110 × 90 mm with 83 parts on 56 nets, routed with 279 tracks and 0 vias.
Its parts include 16 diodes, 16 switches and 1 IC. It belongs with the keyboards and input boards of this library.
Hardware and schematics of My RFR16E Macropad
Uses STM32F401CCU6 "WeAct BlackPill" as MCU.
© 2021 Muhammad Rafli Ardiansyah
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | D_Small_ALT | Diode_THT:D_A-405_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 16 | SW_SPST | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16 |
| 1 | Rotary_Encoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | ENCODER |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | DIP_SW |
| 1 | YAAJ_BluePill_Part_Like | STM32_Board:YAAJ_BluePill_2 | U1 |
The 35 most common of 83 parts.

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350


GaudiLabs/OpenLaserScanningMicroscope
Open Source Laser Scanning Microscope



plinkysynth/plinky_public
a public release of the plinky sw and hw

freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

zoemaestra/hair-electrolysis-machine-usb-c
A fork of scd31's hair electrolysis machine but with USB-C and optimised for cheaper assembly with JLCPCB
It measures 110 × 90 mm and has 2 copper layers, 1.6 mm thick.
83 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rafliard23/rfr16e-hardware repository on GitHub, at the commit this page was made from: the board is RFR-16E.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).