
Dumber v3
INSA-GEI/dumber
Depot du projet de temps reel 4eme année au departement GEI de l'INSA Toulouse.

BB2 PCB and FW
Bira Box 2 r1.3 is an open-source printed circuit board by radiorpl, from the radiorpl/Bira-Box-2 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 130 × 51.3 mm with 62 parts on 68 nets, routed with 467 tracks and 51 vias.
It is built around the PAM8019KGR, MIC5504-3.3YM5 and PMEG2020CPA. Its parts include 22 capacitors, 14 resistors, 6 connectors, 5 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TestPoint | test points:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10 |
| 8 | 0 | SMD caps:C_0402_1005Metric | R7, R8, R9, R10, R11, R12, R13, R14 |
| 8 | 0.1 uF | SMD caps:C_0402_1005Metric | C1, C2, C3, C4, C15, C17, C18, C19 |
| 7 | 1 uF | SMD caps:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5, C6, C7, C8, C9, C12, C13 |
| 3 | Conn_01x02_Female | connector-pin:PinSocket_1x02_P2.54mm_Vertical | J1, J5, J6 |
| 2 | 162K | SMD caps:C_0402_1005Metric | R5, R6 |
| 2 | 2.2 uF | SMD caps:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C11, C21 |
| 2 | 220 uF | SMD caps:CP_Elec_6.3x5.8 | C10, C16 |
| 2 | MIC5504-3.3YM5 | sot:SOT-23-5 | U3, U4 |
| 1 | 10 uF | SMD caps:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C22 |
| 1 | 100 uF | SMD caps:CP_Elec_6.3x5.8 | C14 |
| 1 | 10K | SMD caps:C_0402_1005Metric | R4 |
| 1 | 10K | pots:TT_PO91 | RV1 |
| 1 | 10k | SMD caps:C_0402_1005Metric | R2 |
| 1 | 2.2K | SMD caps:C_0402_1005Metric | R3 |
| 1 | 22 uF | SMD caps:CP_Elec_6.3x5.8 | C20 |
| 1 | 22K | SMD caps:C_0402_1005Metric | R1 |
| 1 | 50K | pots:TT_P091S | RV2 |
| 1 | ATTINY841A-MU | qfn:Texas_S-PVQFN-N20_EP2.7x2.7mm | U1 |
| 1 | AudioJack3_SwitchTR | conn-audio:PJ-3930-8A | J2 |
| 1 | Micro_SD_Card | conn-card:microSD_TF01A | J4 |
| 1 | PAM8019 | qfn:MLF-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U5 |
| 1 | PLAY | SMD LED:LED_0603_1608Metric | LED1 |
| 1 | PMEG2020CPA | pack-son:HUSON-3-1EP_2x2mm_P1.3mm_EP1.1x1.6mm | D3 |
| 1 | SW_SPDT | pots:Alps_SSSU111400 | SW1 |
| 1 | USB_B_Micro | conn-usb:Korean-hropartsC145779 | J3 |
| 1 | YX6200-16S | sop:SOP-16_4.55x10.3mm_P1.27mm | U2 |

INSA-GEI/dumber
Depot du projet de temps reel 4eme année au departement GEI de l'INSA Toulouse.


tdmorton/MIDI_Speaker
The purpose of this project is to build a simple host to receive MIDI commands over USB and output a synthesized sound to a speaker.



tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware

kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.

It measures 130 × 51.3 mm and has 2 copper layers, 1.6 mm thick.
62 parts, built around the PAM8019KGR, MIC5504-3.3YM5 and PMEG2020CPA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the radiorpl/Bira-Box-2 repository on GitHub, at the commit this page was made from: the board is Bira Box 2 r1.3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).