

IntAna
Hardware for OpenPLC with raspberry PI Z and Mod. software OpenPlc
- Size
- 66.2 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 47
- Pads
- 225
- Tracks, vias
- 376, 28
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20190905)
- Created
- 3 Dec 2019
- Updated
- 1 May 2023
Overview
IntAna is an open-source printed circuit board by radioelf, from the radioelf/OpenPlc repository on GitHub. It is a 2-layer board of 66.2 × 63.5 mm with 75 parts on 47 nets, routed with 376 tracks and 28 vias.
It is built around the MAX485ED, ADS1115 and BAT54S, with the RGF1B and MMZ2012Y152B among its other parts. Its parts include 34 resistors, 16 capacitors, 10 diodes, 3 ICs and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICsADS1115
UncategorisedTexas InstrumentsBAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky DiodesRGF1B
SMA(DO-214AC)-65℃~+175℃ 1.3V@1A 1.76W 100V 150ns 1A 30A 5uA@100V SMA(DO-214AC) Fast Recovery / High Efficiency Diodes ROHSonsemiFast Recovery / High Efficiency DiodesMMZ2012Y152B
08050805 Ferrite Beads ROHSTDKFerrite Beads
README
README.mdOpenPlc
Hardware for OpenPLC with raspberry PI Z and Mod. software OpenPlc
Original code:
https://github.com/thiagoralves/OpenPLC_v3
Creative Commons License Disclaimer
UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING, LICENSOR OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS, WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO SUCH EXCLUSION MAY NOT APPLY TO YOU. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8, C13, C14, C15 |
| 4 | 100K | Resistor_SMD:R_0805_2012Metric | R17, R18, R19, R20 |
| 4 | 200R 0.1% | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 4 | 47K | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R12 |
| 4 | 47pF | Capacitor_SMD:C_0805_2012Metric | C9, C10, C11, C12 |
| 4 | 49.9R 0.1% | Resistor_SMD:R_0805_2012Metric | R21, R22, R23, R24 |
| 4 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D5, D6, D7, D8 |
| 4 | RGF1B | Diode_SMD:D_SOT-23_ANK | D1, D2, D3, D4 |
| 3 | 2K2 | Resistor_SMD:R_0805_2012Metric | R14, R15, R16 |
| 3 | 3K3 | Resistor_SMD:R_0805_2012Metric | R6, R7, R8 |
| 2 | 0R | Resistor_SMD:R_0805_2012Metric | R25, R31 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric | R32, R33 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R28, R29 |
| 2 | 4K7 | Resistor_SMD:R_0805_2012Metric | R26, R27 |
| 2 | ADS1115 | Package_SO:TSSOP-10_3x3mm_P0.5mm | U1, U2 |
| 2 | MMZ2012Y152B | Resistor_SMD:R_0805_2012Metric | L1, L2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R34 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C16 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric | R30 |
| 1 | 2K2 1% | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 3K3 1% | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_0-10V | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_5-G-3.5_1x05_P3.50mm_Vertical | J3 |
| 1 | Conn_02x07_Odd_Even | Connector_IDC:IDC-Header_2x07_P2.54mm_Vertical | J1 |
| 1 | Conn_4-20mA | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_8-G-3.5_1x08_P3.50mm_Vertical | J2 |
| 1 | DATA | LED_SMD:LED_0805_2012Metric | D10 |
| 1 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Logo_Open_Hardware_Large | Symbol:OSHW-Logo2_9.8x8mm_SilkScreen | LOGO1 |
| 1 | MAX485E | Package_SO:PowerIntegrations_SO-8 | U3 |
| 1 | RUN | LED_SMD:LED_0805_2012Metric | D9 |
The 71 most common of 75 parts.
More from radioelf/OpenPlc
2- 2 layers129.5 × 72.6 mm

- 2 layers67.6 × 63.8 mm

Similar boards
- 2 layers49.5 × 49.5 mm

Ac relay
kikeelectronico/ac-relay
A relay controlled by an ESP8266 and powered by AC main
17 partsGPL-3.0 - 2 layers255 × 92 mm

LoRaQuadV2
roloran/ROLORAN-Hardware
Custom PCB designs and cases/mounting tools for ROLORAN devices
82 partsGPL-2.0 - 4 layers90 × 100 mm

8ch v3
saewoonam/8ch_currentsource_jlc_v3
V3 of 8 channel current source for biasing superconducting circuits
237 parts - 2 layers119.4 × 30.5 mm

Zynthian zynaptik
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
49 parts156 - 2 layers65.5 × 45 mm

OpenPAT RP2040
lukasnf/OpenPAT-RP2040
A low-voltage Portable Appliance Tester based on the RP2040. Safely measures PE continuity at 200mA and L-N resistance on unpowered appliances.
25 partsCERN-OHL-S-2.0 - 4 layers84 × 100 mm

Esp32s3-can sd logger
MrBlahhhh/esp32-autosport
A data logger you wire straight into a race car: 12 V and CAN come in on one 4-pin plug, sensor readings and CAN traffic get written to a microSD card.
206 parts - 2 layers168.9 × 123.3 mm

OEM ECU
aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware
296 parts161CC0-1.0 - 2 layers94 × 79 mm

Questions
How big is the IntAna PCB?
It measures 66.2 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IntAna use?
75 parts, built around the MAX485ED, ADS1115, BAT54S and RGF1B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IntAna KiCad files?
From the radioelf/OpenPlc repository on GitHub, at the commit this page was made from: the board is hard/cad/Int_Analogica/IntAnalog/IntAna.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the IntAna design in my own project?
Its repository states no licence, so its author keeps all rights: ask radioelf before reusing the design.