

TMC2209 GRBL-ESP32 CNC Board
- Size
- 100 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 78
- Pads
- 263
- Tracks, vias
- 736, 52
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Jan 2022
- Updated
- 29 Jan 2022
Overview
CNC is an open-source printed circuit board by racerxdl, from the racerxdl/tmccncboard repository on GitHub. It is a 2-layer board of 100 × 90 mm with 47 parts on 78 nets, routed with 736 tracks and 52 vias.
Its parts include 16 capacitors, 8 connectors, 7 ICs, 5 resistors and 2 diodes. It belongs with the robots and motor control boards and the ESP32 boards of this library.
README
README.mdtmccncboard
TMC2209 GRBL-ESP32 CNC Board
Made with Kicad 6.0

FluidNC Configuration
This is the current profile I'm using for FluidNC. Its currently WIP and should be used with care.
board: Teske's Lab TMC CNC
name: TMCCNC
stepping:
engine: RMT
idle_ms: 255
pulse_us: 2
dir_delay_us: 1
disable_delay_us: 0
axes:
shared_stepper_disable_pin: gpio.27
x:
steps_per_mm: 1600.000
max_rate_mm_per_min: 5000.000
acceleration_mm_per_sec2: 100.000
max_travel_mm: 250.000
soft_limits: false
homing:
cycle: 2
positive_direction: false
mpos_mm: 150.000
feed_mm_per_min: 100.000
seek_mm_per_min: 200.000
settle_ms: 500Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C7, C8, C9, C12, C13, C14, C15, C16 |
| 7 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C2, C3, C4, C6, C10, C11 |
| 4 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | MOT_A1, MOT_X1, MOT_Y1, MOT_Z1 |
| 4 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3, JP4 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | Conn_02x08_Odd_Even | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J6, J7 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | A - TMC2209 BTT v1.2 | TMC2209:BTT-TMC2209 | U5 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02_Male | TerminalBlock_Altech:Altech_AK300_1x02_P5.00mm_45-Degree | J1 |
| 1 | ESP32_DEVKITV1 | TMC2209:ESP32 DEVKITV1 | U2 |
| 1 | I2C | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | LED-24V | LED_THT:LED_D5.0mm | D1 |
| 1 | LED-5V | LED_THT:LED_D5.0mm | D2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | MCP23017_SS | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U7 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J4 |
| 1 | SD-MODULE | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J3 |
| 1 | UART0 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | X - TMC2209 BTT v1.2 | TMC2209:BTT-TMC2209 | U4 |
| 1 | Y - TMC2209 BTT v1.2 | TMC2209:BTT-TMC2209 | U6 |
| 1 | Z - TMC2209 BTT v1.2 | TMC2209:BTT-TMC2209 | U3 |
The 46 most common of 47 parts.
Similar boards
- 2 layers30 × 61.3 mm

- 2 layers114 × 61.4 mm

- 2 layers80 × 35 mm

V0 Display RP2040
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
47 parts1.1kGPL-3.0 - 2 layers100 × 66.7 mm

MacroPad1
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
47 parts915 - 2 layers100 × 100 mm

- 2 layers36.3 × 99.1 mm

- 2 layers50 × 20.5 mm

- 2 layers33.8 × 131 mm

MicrocontrollerInputModule
FrameworkComputer/InputModules
Reference designs and documentation for the Input Module system in the Framework Laptop 16
47 parts245
Questions
How big is the CNC PCB?
It measures 100 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CNC use?
47 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CNC KiCad files?
From the racerxdl/tmccncboard repository on GitHub, at the commit this page was made from: the board is CNC.kicad_pcb and its schematic CNC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CNC design in my own project?
Its repository states no licence, so its author keeps all rights: ask racerxdl before reusing the design.