

Proto2 chassis
proto2 車体の分配基板(KiCad 8)
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 5
- Pads
- 42
- Tracks, vias
- 89, 35
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Oct 2026
- Updated
- 18 Oct 2026
Overview
Proto2 chassis is an open-source printed circuit board by rabbits-robotics, from the rabbits-robotics/proto2_chassis_pcb repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 50 × 50 mm with 17 parts on 5 nets, routed with 89 tracks and 35 vias.
README
README.mdproto2_chassis_pcb
役割
車体側の分配基板。マイコンは載せず、アクチュエータ系・制御系の電源と CAN を車輪モータドライバへ分配する。
主要部品
| 部品 | 型番 | 用途 |
|---|---|---|
| 電源入力コネクタ | AMASS XT30U-F × 2 | アクチュエータ系、制御系 |
| 電源出力コネクタ | JST PH 8P × 1、JST PH 6P × 1、AMASS XT30U-M × 1 | アクチュエータ系、制御系、メインボード |
| モータドライバ電源 | JST XH 2P × 5 | MD × 5 |
| CAN コネクタ | JST PH B2B-PH-K × 6 |
回路図は proto2_chassis.pdf、部品表は bom.csv、3D は proto2_chassis.step。
ライセンス
© Rabbits Robotics、CERN-OHL-P-2.0。
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | CAN1, CAN2, CAN3, CAN4, CAN5, CAN6 |
| 5 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | MDpower, MDpower1, MDpower2, MDpower3, MDpower4 |
| 2 | Conn_01x02 | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | ACTin, CTLin |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | MainBoard |
| 1 | Conn_01x06 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | CTLout |
| 1 | Conn_01x08 | Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | ACTout |
| 1 | LOGO | LOGO | G*** |
Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the Proto2 chassis PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Proto2 chassis use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Proto2 chassis KiCad files?
From the rabbits-robotics/proto2_chassis_pcb repository on GitHub, at the commit this page was made from: the board is proto2_chassis.kicad_pcb and its schematic proto2_chassis.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Proto2 chassis design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).