

Gamma neck
gamma 首の受動分配基板(KiCad 8)
- Size
- 65 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 11
- Pads
- 50
- Tracks, vias
- 84, 175
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Oct 2026
- Updated
- 18 Oct 2026
Overview
Gamma neck is an open-source printed circuit board by rabbits-robotics, from the rabbits-robotics/gamma_neck_pcb repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 65 × 35 mm with 17 parts on 11 nets, routed with 84 tracks and 175 vias.
README
README.mdgamma_neck_pcb
役割
砲塔と車体をつなぐスリップリングの受け口になる受動分配基板。マイコンは載せず、24V とCAN 2 系統、ゲームモジュール線を分配・パススルーする。
主要部品
| 部品 | 型番 | 用途 |
|---|---|---|
| 24V 出力コネクタ | AMASS XT30PW-F × 3 | 首モータ、P4 キャリアへの 24V 分配 |
| 6P コネクタ | JST PH S6B-PH-K × 2 | リング電源入力、Yaw モータ(MHF5005) |
| CAN コネクタ | JST PH S2B-PH-K × 5 | CAN1 × 3(首モータ)、CAN2 × 2(パススルー) |
| ゲームモジュール線 | JST PA B04B-PASK × 2 | パススルー |
| CAN 終端抵抗 | 120 Ω × 2 | CAN1 / CAN2 の終端 |
| 電源 LED | LED 3mm + 10 kΩ | 24V 通電表示 |
回路図は gamma_neck.pdf、部品表は bom.csv、3D は gamma_neck.step。設計時の検討は docs/ に残している。
ライセンス
© Rabbits Robotics、CERN-OHL-P-2.0。
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | CAN1, CAN1, CAN1, CAN2, CAN2 |
| 3 | Conn_01x02 | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | Vout, Vout, Vout |
| 2 | 120 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 2 | Conn_01x04 | User:JST_PA_B04B-PASK_1x04_P2.00mm_Vertical | GAME_MODULE, GAME_MODULE |
| 2 | Conn_01x06 | Connector_JST:JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal | Vin, YawMotor |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | LED | LED_THT:LED_D3.0mm | POWER |
| 1 | LOGO | LOGO | G*** |
Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the Gamma neck PCB?
It measures 65 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gamma neck use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gamma neck KiCad files?
From the rabbits-robotics/gamma_neck_pcb repository on GitHub, at the commit this page was made from: the board is gamma_neck.kicad_pcb and its schematic gamma_neck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gamma neck design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).