
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

gamma 車体の受動分配ハブ基板(KiCad 8)
Gamma chassis is an open-source printed circuit board by rabbits-robotics, from the rabbits-robotics/gamma_chassis_pcb repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 196 × 118.4 mm with 22 parts on 4 nets, routed with 84 tracks and 320 vias.
車体側の受動分配ハブ。マイコンは載せず、24V 入力を 8 系統に分配し、CAN2 を車輪・脚モータへ分配する。
| 部品 | 型番 | 用途 |
|---|---|---|
| 24V 入力コネクタ | AMASS XT30PW-M × 1 | 幹線からの 24V 入力 |
| 24V 分配コネクタ | AMASS XT30U-F × 8 | 車輪・脚モータへの電源分配 |
| CAN コネクタ | JST PH B2B-PH-K × 9 | CAN_CHASSIS 1〜4、CAN_LEG 1〜4、CAN_TURRET |
| 6P コネクタ | JST PH B6B-PH-K × 1 | 砲塔側(スリップリング)への出力 |
回路図は gamma_chassis.pdf、部品表は bom.csv、3D は gamma_chassis.step。
© Rabbits Robotics、CERN-OHL-P-2.0。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | CAN_CHASSIS1, CAN_CHASSIS2, CAN_CHASSIS3, CAN_CHASSIS4, CAN_LEG1, CAN_LEG2, CAN_LEG3, CAN_LEG4, CAN_TURRET1 |
| 8 | Conn_01x02 | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | Power1, Power2, Power3, Power4, Power5, Power6, Power7, Power8 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | Vin1 |
| 1 | Conn_01x06 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | Vout1 |

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 196 × 118.4 mm and has 2 copper layers, 1.6 mm thick.
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rabbits-robotics/gamma_chassis_pcb repository on GitHub, at the commit this page was made from: the board is gamma_chassis.kicad_pcb and its schematic gamma_chassis.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).