Skip to the content
2 layers106 × 63 mmBeta main, the printed circuit board in 3D

beta の制御基板。Nucleo F303K8 キャリア(KiCad 8)

Size
106 × 63 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
42
Pads
98
Tracks, vias
130, 256
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
18 Oct 2026
Updated
18 Oct 2026

Overview

Beta main is an open-source printed circuit board by rabbits-robotics, from the rabbits-robotics/beta_main_pcb repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 106 × 63 mm with 17 parts on 42 nets, routed with 130 tracks and 256 vias.

README

README.md

beta_main_pcb

役割

Nucleo F303K8 を 1 枚載せる制御基板。CAN 1 系統で首・車輪モータを制御し、射出 ESC、装填モータ、IMU を接続する。

主要部品

部品型番用途
マイコンボードNUCLEO-F303K8制御
CAN トランシーバMCP2562-E/PCAN 1 系統
モータドライバDRV8835装填モータ
IMUBNO055姿勢
電源コネクタAMASS XT30PW-M / XT30PW-F外部 DCDC への往復
6P コネクタJST PH × 3電源入力、Yaw モータ、Pitch モータ
射出 ESCJST PH 2P × 2、XH 2P × 2信号と電源
CAN 終端抵抗120 Ω

回路図は beta_main.pdf、部品表は bom.csv、3D は beta_main.step。

ライセンス

© Rabbits Robotics、CERN-OHL-P-2.0。

Parts

17
QtyValueFootprintReferences
3Conn_01x02Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalFireLeft, FireRight, Load
2Conn_01x02Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalFirePower, FirePower
2Conn_01x06Connector_JST:JST_PH_S6B-PH-K_1x06_P2.00mm_HorizontalVin, YawMotor
1120Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1
1Conn_01x02Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_HorizontalDCDCout
1Conn_01x02Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalCAN
1Conn_01x02Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_HorizontalDCDCin
1Conn_01x06Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_VerticalPitchMotor
1LOGOLOGOG***
1MCP2562-E-PPackage_DIP:DIP-8_W7.62mmCAN
1NUCLEO-F303K8User:MODULE_NUCLEO-F303K8MainBoard
1~User:DRV8835MD
1~User:BNO055Gyro

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the Beta main PCB?

It measures 106 × 63 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Beta main use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Beta main KiCad files?

From the rabbits-robotics/beta_main_pcb repository on GitHub, at the commit this page was made from: the board is beta_main.kicad_pcb and its schematic beta_main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Beta main design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).