

Beta main
beta の制御基板。Nucleo F303K8 キャリア(KiCad 8)
- Size
- 106 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 42
- Pads
- 98
- Tracks, vias
- 130, 256
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Oct 2026
- Updated
- 18 Oct 2026
Overview
Beta main is an open-source printed circuit board by rabbits-robotics, from the rabbits-robotics/beta_main_pcb repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 106 × 63 mm with 17 parts on 42 nets, routed with 130 tracks and 256 vias.
README
README.mdbeta_main_pcb
役割
Nucleo F303K8 を 1 枚載せる制御基板。CAN 1 系統で首・車輪モータを制御し、射出 ESC、装填モータ、IMU を接続する。
主要部品
| 部品 | 型番 | 用途 |
|---|---|---|
| マイコンボード | NUCLEO-F303K8 | 制御 |
| CAN トランシーバ | MCP2562-E/P | CAN 1 系統 |
| モータドライバ | DRV8835 | 装填モータ |
| IMU | BNO055 | 姿勢 |
| 電源コネクタ | AMASS XT30PW-M / XT30PW-F | 外部 DCDC への往復 |
| 6P コネクタ | JST PH × 3 | 電源入力、Yaw モータ、Pitch モータ |
| 射出 ESC | JST PH 2P × 2、XH 2P × 2 | 信号と電源 |
| CAN 終端抵抗 | 120 Ω |
回路図は beta_main.pdf、部品表は bom.csv、3D は beta_main.step。
ライセンス
© Rabbits Robotics、CERN-OHL-P-2.0。
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | FireLeft, FireRight, Load |
| 2 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | FirePower, FirePower |
| 2 | Conn_01x06 | Connector_JST:JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal | Vin, YawMotor |
| 1 | 120 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | DCDCout |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | CAN |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | DCDCin |
| 1 | Conn_01x06 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | PitchMotor |
| 1 | LOGO | LOGO | G*** |
| 1 | MCP2562-E-P | Package_DIP:DIP-8_W7.62mm | CAN |
| 1 | NUCLEO-F303K8 | User:MODULE_NUCLEO-F303K8 | MainBoard |
| 1 | ~ | User:DRV8835 | MD |
| 1 | ~ | User:BNO055 | Gyro |
Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the Beta main PCB?
It measures 106 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Beta main use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Beta main KiCad files?
From the rabbits-robotics/beta_main_pcb repository on GitHub, at the commit this page was made from: the board is beta_main.kicad_pcb and its schematic beta_main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Beta main design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).