2 layers52.3 × 10.5 mm
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
29 parts5.1kGPL-3.0
2 layers58.7 × 104 mm
Custom keyboard
raahimfareed/macropad- Size
- 58.7 × 104 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 31
- Pads
- 145
- Tracks, vias
- 151, 12
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Apr 2024
- Updated
- 28 Apr 2024
Overview
Custom keyboard is an open-source printed circuit board by raahimfareed, from the raahimfareed/macropad repository on GitHub. It is a 2-layer board of 58.7 × 104 mm with 29 parts on 31 nets, routed with 151 tracks and 12 vias.
Its parts include 9 diodes, 2 resistors, 1 IC, 1 connector and 1 switch. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 9 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1u | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8, MX9 |
| 5 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | MH1, MH2, MH3, MH4, MH5 |
| 2 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Horizontal | J1 |
| 1 | ProMicro | Keebio-Parts:ArduinoProMicro | U1 |
| 1 | RotaryEncoder_Switch | Keebio-Parts:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SSD1306 | SSD1306:128x64OLED | Brd1 |
Questions
How big is the Custom keyboard PCB?
It measures 58.7 × 104 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Custom keyboard use?
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Custom keyboard KiCad files?
From the raahimfareed/macropad repository on GitHub, at the commit this page was made from: the board is kicad/custom_keyboard.kicad_pcb and its schematic kicad/custom_keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Custom keyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask raahimfareed before reusing the design.
Similar boards
- 2 layers56 × 20 mm
HallEffectXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
29 parts1.1kGPL-3.0 - 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers16.8 × 13.6 mm
E Fidget Lite
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
29 parts915 - 2 layers85 × 12.5 mm
TERES PCB3-TOUCH BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
29 parts578Apache-2.0 - 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers80 × 55 mm
- 2 layers55 × 58 mm
