
Base
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Bootable ISA HD-Floppy + Serial Card
Monotech HD Floppy Serial is an open-source printed circuit board by r1cebank, from the r1cebank/Monotech-Bootable-HD-Floppy-Serial repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 105.4 × 83.8 mm with 43 parts on 103 nets, routed with 1,268 tracks and 61 vias.
Its parts include 17 capacitors, 8 ICs, 5 switches, 2 resistors and 2 connectors. It belongs with the interfaces and adapters boards of this library.
Based on Sergey Kiselev's (https://github.com/skiselev) design: http://www.malinov.com/Home/sergeys-projects/isa-fdc-and-uart
The unlabeled solder-jumper on the back of the PCB pulls down D7.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitors_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 |
| 4 | 10uF | Capacitors_THT:CP_Radial_Tantal_D4.5mm_P5.00mm | C11, C12, C13, C14 |
| 2 | 10K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 22pF | Capacitors_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C15, C16 |
| 2 | 74LS138 | Housings_DIP:DIP-16_W7.62mm | U6, U7 |
| 2 | CONN_1 | HOLE_3MM | HOLE1, HOLE2 |
| 1 | 1.8432MHz TTL | Oscillators:Oscillator_DIP-14 | U8 |
| 1 | 10K | Resistors_THT:R_Array_SIP8 | RN1 |
| 1 | 16(C)x50 | PLCC44_TH | U2 |
| 1 | 1K | Resistors_THT:R_Array_SIP8 | RN2 |
| 1 | 24MHz | Crystals:Crystal_HC49-4H_Vertical | X1 |
| 1 | 28C64B Mode | Custom:SW_MS-22D18G2 | SW5 |
| 1 | 4.7nF | Capacitors_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C17 |
| 1 | 74LS688 | Housings_DIP:DIP-20_W7.62mm | U5 |
| 1 | 82077AA/PC8477 | PLCC68_TH | U1 |
| 1 | BUSPC_DEV | Custom:Conn_Bus_ISA8 | BUS1 |
| 1 | Boot ROM | Housings_DIP:DIP-28_W15.24mm_Socket | U4 |
| 1 | Boot ROM Address | Buttons_Switches_THT:SW_DIP_x4_W7.62mm_Slide | SW2 |
| 1 | D7_Pulldown | Custom:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | Enable ROM | Custom:CKCOMP-OS102011MA1QN1 | SW3 |
| 1 | Floppy | Custom:Pin_Header_Straight_2x17_Pitch2.54mm_shrouded | P1 |
| 1 | GD75232/75(C)185 | Housings_DIP:DIP-20_W7.62mm | U3 |
| 1 | LOGO | Custom:Monotech_Logo_150 | G*** |
| 1 | PS/2 Floppy Power > | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP1 |
| 1 | ROM Write-Protect | Custom:CKCOMP-OS102011MA1QN1 | SW4 |
| 1 | Serial Port | Conn_Dsub_DE9M | P2 |
| 1 | Serial Port Config | Buttons_Switches_THT:SW_DIP_x8_W7.62mm_Slide | SW1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

rusefi/rusefi
rusefi - GPL internal combustion engine control unit


jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository


tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
It measures 105.4 × 83.8 mm and has 2 copper layers, 1.6 mm thick.
43 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the r1cebank/Monotech-Bootable-HD-Floppy-Serial repository on GitHub, at the commit this page was made from: the board is Monotech-HD-Floppy-Serial.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).