Skip to the content
2 layersNoose, the printed circuit board in 3D

Dude, where's my bike?!

Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
6
Pads
29
Tracks, vias
26, 0
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
18 Dec 2015
Updated
24 Dec 2015

Overview

Noose is an open-source printed circuit board by qweqq, from the qweqq/dwmb repository on GitHub, published under the MIT licence. It is a 2-layer board with 12 parts on 6 nets, routed with 26 tracks and 0 vias.

Its parts include 4 resistors, 3 connectors and 1 capacitor.

README

README.md

dwmb

Dude, where's my bike?!

Goals

Build a system that notifies you/a guard/a group of people if someone is trying to steal your bike! (and in case it is stolen provide information)

Parts

12
QtyValueFootprintReferences
4VAL**Capacitors_ThroughHole:Capacitor7.5MMDiscRM5Capacitor7.5MMDiscRM5, Capacitor7.5MMDiscRM5, Capacitor7.5MMDiscRM5, Capacitor7.5MMDiscRM5
120Resistors_SMD:R_0805R2
122kResistors_SMD:R_0805R4
147nCapacitors_SMD:C_0805C1
1IN_CABLEPin_Headers:Pin_Header_Straight_1x03P1
1JACKjacks:JACK_STEREOJ1
1NOOSE_CABLEPin_Headers:Pin_Header_Straight_1x03P2
1RX_HIGHResistors_SMD:R_0805R3
1RX_LOWResistors_SMD:R_0805R1

More from qweqq/dwmb

2
  • 2 layersDwmb, the printed circuit board in 3D

    Dwmb

    qweqq/dwmb

    Dude, where's my bike?!

    120 parts1MIT
  • 2 layersPower, the printed circuit board in 3D

    Power

    qweqq/dwmb

    Dude, where's my bike?!

    10 parts1MIT

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

What parts does the Noose use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Noose KiCad files?

From the qweqq/dwmb repository on GitHub, at the commit this page was made from: the board is electronics/noose/noose.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Noose design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).