
ESPDali
petrinm/ESP32Dali
Interface with DALI compatible lighting devices using ESPHome project

Fanzy pcb is an open-source printed circuit board by qulxizer, from the qulxizer/fanzy-pcb repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 47 × 41 mm with 23 parts on 15 nets, routed with 186 tracks and 3 vias.
It is built around the TLP185 and PN2222A. Its parts include 4 resistors, 3 capacitors, 3 ICs, 3 connectors and 1 diode. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP5, TP6, TP7 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | HT75xx-1-SOT89 | Package_TO_SOT_SMD:SOT-89-3_Handsoldering | U6 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | STM32G031J6Mx | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Screw_Terminal_01x06 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-6-5.08_1x06_P5.08mm_Horizontal | J4 |
| 1 | TLP185 | Octocoupler:TLP185 | U5 |

petrinm/ESP32Dali
Interface with DALI compatible lighting devices using ESPHome project

jdelahayes/KCNC-GRBL_SHIELD_PCB
Ceci est un shield GRBL pour Arduino Uno adapté à la R-CNC (makerfr.com).

romioRN/DC-CDI
ВНИМАНИЕ! в плате есть отсутствующие дjрожки если вы хотите это изготовить вам нужно внести исправления



caketetu/SPM-STMTB-V1
SPM-STMTBを使用した低電圧バイポーラステッピングモータードライバ(Low Voltage Stepping motor Driver) ドライバICはToshibaのTC78S600FTGを使用。\…


ihartwig/mate-net-monitor
Baseboard PCBA for MATE Net monitoring with a Particle Boron
It measures 47 × 41 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the TLP185 and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the qulxizer/fanzy-pcb repository on GitHub, at the commit this page was made from: the board is fanzy-pcb.kicad_pcb and its schematic fanzy-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).