

DolbyS NR HIC
Tascam 238S schematics and additional information
- Size
- 76 × 28 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 89
- Pads
- 273
- Tracks, vias
- 711, 46
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Oct 2020
- Updated
- 13 Sep 2024
Overview
DolbyS NR HIC is an open-source printed circuit board by quietcat, from the quietcat/tascam238s repository on GitHub. It is a 2-layer board of 76 × 28 mm with 100 parts on 89 nets, routed with 711 tracks and 46 vias.
It is built around the NE5532AD, MMBD914 and MMBFJ201, with the MMBFJ270 among its other parts. Its parts include 45 resistors, 44 capacitors, 4 diodes, 4 transistors and 2 ICs.
Main components
4NE5532AD
SOIC-8-15V~15V 0℃~+70℃ 100dB 12MHz 150nA 1uA 2 4mV 5V/us 5V~15V 5nV/√Hz@1kHz 60mA 6mA Built-in compensation SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierMMBD914
SOT-231.25V@150mA 100V 1uA@75V 300mA 350mW 4ns 500mA Independent SOT-23 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesMMBFJ201
SOT-23-3L-55℃~+150℃ 1mA 300mV 350mW 40V N-Channel SOT-23-3L JFETs ROHSonsemiJFETsMMBFJ270
SOT-23-55℃~+150℃ 1 P-Channel 225mW 2mA 30V 500mV P-Channel SOT-23 JFETs ROHSonsemiJFETs
README
README.mdThe Missing Tascam 238S Service Manual
Tascam 238S schematics and additional information. The Dolby S daughtercards are also used in Tascam MSR
rp-amp-pcb
https://github.com/quietcat/tascam238s/blob/main/rp-amp-pcb.pdf
Contains Kicad schematics for the part of Tascam 238S channel PCB that is different from the dbx version
dolby-hic
https://github.com/quietcat/tascam238s/blob/main/dolby-hic.pdf
Contains Kicad schematics for Dolby S NR HIC PCB, a Dolby encoder/decoder daughtercard for Tascam 238S
https://github.com/quietcat/tascam238s/tree/main/dolby-hic/gerbers contains Gerber files for a replacement Dolby PCB. The layout is different from the original, but functionally it is the same.
Visit https://238pro.com for more information on Tascam 238/238S repair and service
238S Calibration
First, calibrate the unit with Dolby S out.
Set all channels to recording mode, then press Pause and Record.
Feed -10 dBV/0 dBVU 400Hz (316 mV RMS) signal to the line inputs, and use ENC ADJ trimmer to adjust AC voltage on TP1 to be 388 mV.
Use ENC OUT trimmer to adjust AC voltage on REC LEVEL trimmer input lead (closest to the front) to be the same in both Dolby IN and OUT modes on each channel.
With Dolby S OUT, make a recording of -10 dBV/0 dBVU 400Hz test tone on all channels.
Set Dolby to IN, play back the recording and use DEC ADJ trimmer to adjust AC voltage on TP1 to be 388 mV on all channels.
Use DEC OUT trimmer to set voltage on the line out to -10 dBV (316 mV) on all channels.
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C8, C11, C15, C17 |
| 5 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R20, R23, R36, R41 |
| 4 | 1.8n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C19, C21, C22 |
| 4 | MMBD914 | Package_TO_SOT_SMD:SOT-23 | D1, D2, D3, D4 |
| 3 | 0.1u | Capacitor_SMD:CP_Elec_4x5.8 | C41, C44, C48 |
| 3 | 2.4k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R42, R49 |
| 3 | 30k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R11, R12 |
| 3 | 33 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R46, R47 |
| 2 | 0.22u | Capacitor_SMD:CP_Elec_4x5.8 | C16, C23 |
| 2 | 0.22u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C42, C46 |
| 2 | 0.47u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C43, C45 |
| 2 | 1.6k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32, R37 |
| 2 | 1.8k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R38, R43 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24, R27 |
| 2 | 11k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R22 |
| 2 | 15n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C38, C39 |
| 2 | 16k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R14 |
| 2 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28, C33 |
| 2 | 22n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C20 |
| 2 | 39k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R19 |
| 2 | 39n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C24, C25 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R40, R50 |
| 2 | 47 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R45, R48 |
| 2 | 470n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 8.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30, R52 |
| 2 | 8.2n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31, C34 |
| 2 | 820k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29, R35 |
| 2 | 82n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C37, C47 |
| 2 | MMBFJ201 | Package_TO_SOT_SMD:SOT-23 | Q2, Q4 |
| 2 | MMBFJ270 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3 |
| 1 | 0.47u | Capacitor_SMD:CP_Elec_4x5.8 | C13 |
| 1 | 1.0u | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C26 |
| 1 | 1.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R51 |
| 1 | 1.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R44 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34 |
| 1 | 10u | Capacitor_SMD:CP_Elec_4x5.8 | C12 |
| 1 | 13k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R31 |
| 1 | 18(33)n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18 |
| 1 | 18k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26 |
| 1 | 18n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 2.2n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C30 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 22(11)k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 220n | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C35 |
| 1 | 22u | Capacitor_SMD:CP_Elec_5x5.8 | C5 |
| 1 | 24k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
| 1 | 27k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 330n | Capacitor_SMD:C_1812_4532Metric | C49 |
| 1 | 36k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 470p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C29 |
| 1 | 47n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C40 |
| 1 | 680p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C27 |
| 1 | 91(68)k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | CXA1417Q | 238:QFP-48_12x12mm_P0.8mm | U1 |
| 1 | DOLBY_S_CONN | 238:DOLBY_S_CONN | J1 |
| 1 | NE5532A | Package_SO:SO-8_5.3x6.2mm_P1.27mm | U2 |
More from quietcat/tascam238s
1- 2 layers58 × 67 mm

Similar boards
- 2 layers299.3 × 93.1 mm

- 4 layers90 × 100 mm

Skylark usb
naturalhazardscience/groundlark
Open source hardware for community-powered citizen science
132 partsMIT - 2 layers17.8 × 101.6 mm

EurorackMicrocontrollerModule
Fora888/Universal-Teensy-4.0-Eurorack-Shield
Teensy 4.0 shield with ADC, DAC and breakouts for perfboard
43 parts2 - 4 layers165.7 × 85 mm

Amplificateur Audio
HodearS/Projet_Sound_Bar_DIY
L'objectif de ce projet est de réaliser une barre de son DIY compatible Dolby Atmos. Pour cela, la barre de son exploitera des architectures de chez Texas Instruments, à la fois pour le processeur audio et la carte…
859 parts2 - 4 layers327.6 × 186.9 mm

- 2 layers104 × 158 mm

- 4 layers104 × 158 mm

- 4 layers52.5 × 59.7 mm

ESPHome Indoor Multi Sensor
mikelawrence/esphome-indoor-multi-sensor-hardware
ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.
113 parts14CERN-OHL-P-2.0
Questions
How big is the DolbyS NR HIC PCB?
It measures 76 × 28 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DolbyS NR HIC use?
100 parts, built around the NE5532AD, MMBD914, MMBFJ201 and MMBFJ270. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DolbyS NR HIC KiCad files?
From the quietcat/tascam238s repository on GitHub, at the commit this page was made from: the board is dolby-hic/DolbyS_NR_HIC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DolbyS NR HIC design in my own project?
Its repository states no licence, so its author keeps all rights: ask quietcat before reusing the design.