QuickLogic-Corp/qomu-dev-board43100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
Qomu board is an open-source printed circuit board by QuickLogic-Corp, from the QuickLogic-Corp/qomu-dev-board repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 4-layer board of 13 × 9.4 mm with 52 parts on 36 nets, routed with 821 tracks and 190 vias.
It is built around the GD25Q16CEIGR, MIC5504-3.3YMT-T5 and D5V0L1B2LP3-7-HXY, with the VCUT05E1-SD0 among its other parts. Its parts include 14 capacitors, 9 resistors, 7 ICs, 7 diodes and 3 transistors.
Qomu Development Board for EOS S3
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n, 6.3V, X5R, 0201 | qomu-board-footprints:C_0201_0603Metric | C3, C5, C6, C8, C10, C11 |
| 6 | D5V0L1B2LP3-7 | qomu-board-footprints:X1-DFN1006-2 | D1, D2, D3, D4, D6, D7 |
| 4 | 2u2, 10V, X5R, 0201 | qomu-board-footprints:C_0201_0603Metric | C1, C2, C7, C9 |
| 4 | TP_SMD_0_75MM | qomu-board-footprints:Testpoint_pad_1mm | TP4, TP5, TP6, TP7 |
| 3 | 10k, 1%, 0201 | qomu-board-footprints:R_0201_0603Metric | R1, R2, R5 |
| 3 | RV1C002UN | qomu-board-footprints:VML0806 | Q1, Q2, Q3 |
| 3 | TP_SMD_0_75MM | qomu-board-footprints:Testpoint_smd_0_75_0_6mm | TP2, TP3, TP8 |
| 2 | 100R, 1%, 0201 | qomu-board-footprints:R_0201_0603Metric | R16, R17 |
| 2 | 22R, 1%, 0201 | qomu-board-footprints:R_0201_0603Metric | R11, R12 |
| 2 | 8p, 25V, NP0, 0201 | qomu-board-footprints:C_0201_0603Metric | C13, C14 |
| 2 | MIC5504-3.3YMT | qomu-board-footprints:Texas_X2SON-4_1x1mm_P0.65mm | U1, U2 |
| 1 | 1k5, 1%, 0201 | qomu-board-footprints:R_0201_0603Metric | R9 |
| 1 | 1u, 6.3V, X5R, 0201 | Capacitors_SMD:C_0201 | C4 |
| 1 | 1u, 6.3V, X5R, 0201 | qomu-board-footprints:C_0201_0603Metric | C15 |
| 1 | 220R, 1%, 0201 | qomu-board-footprints:R_0201_0603Metric | R18 |
| 1 | Captouch Pads | qomu-board:captouch-edge | SW2 |
| 1 | ECS-_327-12_5-1210-TR | qomu-board-footprints:XTAL_ECS-.327-12.5-1210-TR | XTAL1 |
| 1 | EOS-S3 | qomu-board:42-WLCSP | IC1 |
| 1 | GD25Q16CEIGR | qomu-board-footprints:GD25Q16CEIGR | U4 |
| 1 | NCP803 | qomu-board-footprints:SC-70_SOT-323 | U3 |
| 1 | UHD1110-FKA | qomu-board-footprints:LED-RGB-5DS-UHD1110-FKA | U10 |
| 1 | USB-B | qomu-board:USB-PCB | U9 |
| 1 | VCUT05E1-SD0 | qomu-board-footprints:X1-DFN1006-2 | D5 |
| 1 | antmicro_logo | qomu-board-footprints:antmicro-logo_midlayer_4mm | N2 |
| 1 | oshw_logo | qomu-board-footprints:OSHW-Logo2_7.3x6mm_Copper_Mask | N1 |
| 1 | ql_logo | qomu-board-footprints:Ql_logo_mid_9mm | N3 |
It measures 13 × 9.4 mm and has 4 copper layers, 0.6 mm thick.
52 parts, built around the GD25Q16CEIGR, MIC5504-3.3YMT-T5, D5V0L1B2LP3-7-HXY and VCUT05E1-SD0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the QuickLogic-Corp/qomu-dev-board repository on GitHub, at the commit this page was made from: the board is qomu-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
antmicro/qomu-dev-board
This repository contains open hardware design files for the Qomu development board based on the QuickLogic EOS S3 Sensor Processing Platform . The design files were created by Antmicro in cooperation with QuickLogic .
AlexeyInwerp/BoardRipper
Web-based PCB boardview viewer for board-level repair. 14 formats: BVR1/3, BRD, BDV, BDV ASC, FZ, GenCAD, Mentor Neutral, XZZ, TVW, Allegro v15-v18, Altium, KiCad, EAGLE.
jgillick/ThunderPack
A self-contained microcontroller, battery, and power management system that fits in your pocket.
Nitrokey/nitrokey-3a-nfc-lpc55-hardware
Nitrokey 3 USB-A NFC LPC55 hardware
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products