2 layers226 × 236.9 mm
2 layers41.3 × 31.2 mm
Levitator
QuartzAl/Projects-showcaseMain repository where I keep all of my project showcases related to Electrical Engineering These include PCB designs, electronic circuits, code snippets, and more.
- Size
- 41.3 × 31.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 13
- Pads
- 42
- Tracks, vias
- 81, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Feb 2025
- Updated
- 28 Feb 2025
Overview
Levitator is an open-source printed circuit board by QuartzAl, from the QuartzAl/Projects-showcase repository on GitHub. It is a 2-layer board of 41.3 × 31.2 mm with 13 parts on 13 nets, routed with 81 tracks and 0 vias.
It is built around the LM358, MP1584EN and L7805, with the IRLZ44N among its other parts. Its parts include 3 ICs, 3 connectors, 2 capacitors, 2 resistors and 1 diode.
Main components
4
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierMP1584EN
SOIC-8-EP-20℃~+85℃ 1 100kHz~1.5MHz 4.5V~28V Adjustable Buck Buck Built-in SOIC-8-EP DC-DC Converters ROHSMonolithic Power SystemsDC-DC Converters
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
IRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
README
README.md
Projects World!
Main repository where I keep all of my project showcases related to Electrical Engineering These include PCB designs, electronic circuits, code snippets, and more. The directories in this repository refer to individual projects that were completed that I think do not need their own github repository
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-92_Inline_Wide | U2 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm_LongPads | U1 |
| 1 | MP1584 | Module:MP1584 | U4 |
| 1 | Screw_Terminal_01x02 | Connector:Screw terminal | J1 |
| 1 | Screw_Terminal_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | Screw_Terminal_01x03 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J3 |
Questions
How big is the Levitator PCB?
It measures 41.3 × 31.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Levitator use?
13 parts, built around the LM358, MP1584EN, L7805 and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Levitator KiCad files?
From the QuartzAl/Projects-showcase repository on GitHub, at the commit this page was made from: the board is Magnetic Levitator/levitator/levitator.kicad_pcb and its schematic Magnetic Levitator/levitator/levitator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Levitator design in my own project?
Its repository states no licence, so its author keeps all rights: ask QuartzAl before reusing the design.
Similar boards
- 2 layers100 × 100 mm
- 2 layers135.6 × 85.3 mm
- 2 layers
JONICA
mhechavarria/color-caps-classifier
A project made mostly in python to classifie color caps using OpenCV
59 parts - 4 layers
- 4 layers111 × 21 mm
- 2 layers93.4 × 87.4 mm
- 2 layers100 × 90 mm
