2 layers97.2 × 59.1 mm
ArmLEDsPrototype
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
35 parts915
2 layers195.1 × 114.7 mm
Thinbox
quark-works/ThinboxThis was a flatbox until what only remained was the controller and layout
- Size
- 195.1 × 114.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 28
- Pads
- 198
- Tracks, vias
- 144, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 May 2025
- Updated
- 27 May 2025
Overview
Thinbox is an open-source printed circuit board by quark-works, from the quark-works/Thinbox repository on GitHub, published under the MIT licence. It is a 2-layer board of 195.1 × 114.7 mm with 35 parts on 28 nets, routed with 144 tracks and 0 vias.
Its parts include 20 switches, 2 connectors and 1 IC. It belongs with the RP2040 boards of this library.
README
README.mdThinbox
This was a flatbox until what only remained was the controller and layout
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | SW_Push | PCM_marbastlib-xp-choc:SW_choc_v2_HS_CPG135001S30_1u | SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19 |
| 9 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | H1, H2, H3, H4, H5, H6, H7, H8, H9 |
| 6 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | S1 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | RP2040-Matrix | PCM_marbastlib-xp-promicroish:RP2040-Matrix_ACH | U1 |
| 1 | USB_A | Footprints:GCT_USB1130-15-A_REVA | J1 |
| 1 | Val** | qw-art:dopamine | Ref** |
| 1 | Val** | 1999:1999 logo md | Ref** |
| 1 | Val** | qw-logo:qw new logo silk + copper md | Ref** |
Questions
How big is the Thinbox PCB?
It measures 195.1 × 114.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Thinbox use?
35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Thinbox KiCad files?
From the quark-works/Thinbox repository on GitHub, at the commit this page was made from: the board is PCB/Thinbox.kicad_pcb and its schematic PCB/Thinbox.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Thinbox design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers62 × 42 mm
- 2 layers75 × 26 mm
DIY detector electron variant
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
35 parts558BSD-2-Clause - 2 layers45 × 25 mm
ReCamera Basically Board
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
35 parts495Apache-2.0 - 2 layers160.8 × 24.4 mm
- 2 layers75 × 50 mm
- 2 layers50 × 20.5 mm
- 2 layers50.5 × 67.1 mm
