
RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance

Assets and instructions for retrofitting a Realistic TRC-219 with Teensy 3.2
Realistic trc retrofit is an open-source printed circuit board by quantcon, from the quantcon/realistic-trc-retrofit repository on GitHub. It is a 2-layer board of 180 × 56 mm with 23 parts on 70 nets, routed with 165 tracks and 5 vias.
It is built around the LM386. Its parts include 5 switches, 4 capacitors, 4 ICs, 3 connectors and 1 resistor. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Assets for retrofitting a Realistic TRC-219 with Teensy 3.2
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.05µF | Capacitors_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 10 | Resistors_THT:Resistor_Vertical_RM5mm | R1 |
| 1 | 10k AUDIO | Connectors_JST:JST_EH_B03B-EH-A_03x2.50mm_Straight | RV2 |
| 1 | 10k LIN | Connectors_JST:JST_EH_B03B-EH-A_03x2.50mm_Straight | RV1 |
| 1 | 10µF | Capacitors_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 1µF | Capacitors_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 220 µF | Capacitors_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C3 |
| 1 | Aux_Power | Pin_Headers:Pin_Header_Straight_1x02 | J1 |
| 1 | Batt Test | Connectors_JST:JST_EH_B02B-EH-A_02x2.50mm_Straight | SW3 |
| 1 | ChanSw | 4pdt:3pdt | SW1 |
| 1 | Hi/Lo | Connectors_JST:JST_EH_B02B-EH-A_02x2.50mm_Straight | SW4 |
| 1 | LM386 | Housings_DIP:DIP-8_W7.62mm | U4 |
| 1 | Mod LED | Connectors_JST:JST_EH_B02B-EH-A_02x2.50mm_Straight | D1 |
| 1 | ON/OFF | Connectors_JST:JST_EH_B02B-EH-A_02x2.50mm_Straight | SW2 |
| 1 | PBOOST500 | Pin_Headers:Pin_Header_Straight_1x08 | U1 |
| 1 | POT_MOUNT | 4pdt:POT_MOUNT | J3 |
| 1 | PTT | 4pdt:4pdt | S1 |
| 1 | PowerJack | 4pdt:Power_Jack | J2 |
| 1 | SD_Card_Module | Pin_Headers:Pin_Header_Straight_1x08 | U3 |
| 1 | Speaker | Connectors_JST:JST_EH_B02B-EH-A_02x2.50mm_Straight | LS1 |
| 1 | Teensy3.2 | Teensy:Teensy30_31_32_LC | U2 |
The 21 most common of 23 parts.

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO


oskitone/poly555
The POLY555 is a polyphonic, analog, square wave synth based on the 555 timer chip.

robfinch/Cores
Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.


It measures 180 × 56 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the LM386. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the quantcon/realistic-trc-retrofit repository on GitHub, at the commit this page was made from: the board is KiCad/CB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask quantcon before reusing the design.