

Ece-4275-final
Final Project for ECE 4275: Microelectronic Systems
- Size
- 96.5 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 94
- Nets
- 99
- Pads
- 475
- Tracks, vias
- 852, 98
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Apr 2026
- Updated
- 29 Apr 2026
Overview
Ece-4275-final is an open-source printed circuit board by pyshrekek, from the pyshrekek/ece-4275-final repository on GitHub. It is a 2-layer board of 96.5 × 63.5 mm with 94 parts on 99 nets, routed with 852 tracks and 98 vias.
It is built around the ESP32-S3-WROOM-1-N8, LMR36015ARNXR and AMS1117-3.3, with the TMC5160A-TA, USBLC6-2SC6 and AO3400A among its other parts. Its parts include 25 capacitors, 25 resistors, 11 transistors, 10 connectors and 5 ICs. It belongs with the ESP32 boards of this library.
Main components
6ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLMR36015ARNXR
VQFN-12(2x3)-40℃~+150℃@(TJ) 1 1.5A 26uA 4.2V~60V 400kHz Adjustable Buck Buck Built-in Yes VQFN-12(2x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTMC5160A-TA
eTQFP-48UncategorisedAnalog DevicesUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.md- 48 V input
- Powerful microprocessor to support advanced acceleration control and web server
- Support for up to 4-8 stepper motors
- USB port for webcam (potentially)
- PWM controlled output for heater SSRs
- PWM pins for fans and LEDs
- Analog and digital pins for sensors,
- Display output via SPI
- Wi-Fi, Bluetooth, and Ethernet connectivity
Parts
94| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | BSZ150N10LS3-G | Package_SON:VSON-8_3.3x3.3mm_P0.65mm_NexFET | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | RG | Resistor_SMD:R_0402_1005Metric | R7, R8, R9, R10, R16, R17, R19, R20 |
| 7 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C8, C9, C10, C22, C23, C24 |
| 4 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C19, C20, CBOOT1 |
| 4 | 47 | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14 |
| 4 | CB | Capacitor_SMD:C_0402_1005Metric | C12, C13, C14, C15 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R22, R23, RFBB1 |
| 3 | 470nF | Capacitor_SMD:C_0402_1005Metric | C6, C11, C16 |
| 3 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q9, Q10, Q11 |
| 3 | FAN | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | JFAN0, JFAN1, JFAN2 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 220nF | Capacitor_SMD:C_0402_1005Metric | CHF1, CHF2 |
| 2 | 330 | Resistor_SMD:R_0402_1005Metric | R2, R21 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C18, Cin1 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | R | Resistor_SMD:R_0402_1005Metric | R1, R3 |
| 2 | RS | Resistor_SMD:R_0402_1005Metric | R15, R18 |
| 2 | SW_Omron_B3FS | Button_Switch_SMD:SW_Push_1P1T-SH_NO_CK_KMR2xxG | BOOT1, EN1 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 15uH | Inductor_SMD:L_6.3x6.3_H3 | L1 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 20uF | Capacitor_SMD:C_0402_1005Metric | CFF1 |
| 1 | 22n, 100V | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 2R2 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 52.3k | Resistor_SMD:R_0402_1005Metric | RFBT1 |
| 1 | 680 | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | C_Polarized | Capacitor_SMD:CP_Elec_3x5.3 | C_E1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | GPIO_38_48 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J4 |
| 1 | LED | LED_THT:LED_D10.0mm | POWER_LED1 |
| 1 | LED_CONN_0 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J2 |
| 1 | LED_CONN_1 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J1 |
| 1 | LIMIT_0 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J14 |
| 1 | LIMIT_1 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J15 |
| 1 | LIMIT_2 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J16 |
| 1 | LMR36015ARNXR | IMPORTS:LMR36015 | U4 |
| 1 | STEPPER_1_JST_XH | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J7 |
| 1 | THERM1 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | THERM1 |
| 1 | THERM2 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | THERM2 |
| 1 | TMC5160A-TA | Package_QFP:TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm_ThermalVias | U3 |
| 1 | TX_RX | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J5 |
The 90 most common of 94 parts.
Similar boards
- 6 layers168.6 × 242.3 mm

- 4 layers100 × 100 mm

Power feed
liorknafo/power-feed-manual-mill
DIY stepper power feed for a SIEG X3.5D mill: electromagnetic clutch, RP2040 controller PCB, Rust firmware, build123d CAD
195 parts - 4 layers

Corevus k
calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers
283 parts25 - 2 layers50 × 30 mm

- 2 layers43 × 43 mm

- 2 layers200 × 200 mm

- 4 layers100 × 80 mm

Lamp rev a
laminarforge/laminarforge-cad
Parametric CAD models (Rust + vcad) for LaminarForge open-source LAMP diagnostics device
107 parts - 6 layers62 × 55.5 mm

Stepper driver
bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.
204 parts5Apache-2.0
Questions
How big is the Ece-4275-final PCB?
It measures 96.5 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ece-4275-final use?
94 parts, built around the ESP32-S3-WROOM-1-N8, LMR36015ARNXR, AMS1117-3.3 and TMC5160A-TA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ece-4275-final KiCad files?
From the pyshrekek/ece-4275-final repository on GitHub, at the commit this page was made from: the board is kicad/ece-4275-final.kicad_pcb and its schematic kicad/ece-4275-final.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ece-4275-final design in my own project?
Its repository states no licence, so its author keeps all rights: ask pyshrekek before reusing the design.