4 layers120 × 120 mm
2 layers171.2 × 136.9 mm
Game lights out
pvar/pcb_lights_out- Size
- 171.2 × 136.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 114
- Nets
- 89
- Pads
- 345
- Tracks, vias
- 691, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Aug 2023
- Updated
- 2 Aug 2025
Overview
Game lights out is an open-source printed circuit board by pvar, from the pvar/pcb_lights_out repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 171.2 × 136.9 mm with 114 parts on 89 nets, routed with 691 tracks and 14 vias.
It is built around the ATMEGA328-PU and ULN2803A. Its parts include 44 diodes, 43 switches, 10 resistors, 3 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
Parts
114| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | CQY99 | LED_THT:LED_D3.0mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +28 |
| 41 | SW_MEC_5E | kicad_footprints:SW_PUSH_6mm_H5mm | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +25 |
| 7 | 200R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R6, R7, R8, R9, R10 |
| 4 | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | , , , | |
| 3 | 100n | Capacitor_THT:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C1, C2, C3 |
| 2 | 50R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 2 | SW_MEC_5E | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW41, SW42 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | ATmega328-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | Speaker | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | ULN2803A | Package_DIP:DIP-18_W7.62mm | U2 |
The 107 most common of 114 parts.
Questions
How big is the Game lights out PCB?
It measures 171.2 × 136.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Game lights out use?
114 parts, built around the ATMEGA328-PU and ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Game lights out KiCad files?
From the pvar/pcb_lights_out repository on GitHub, at the commit this page was made from: the board is game_lights_out.kicad_pcb and its schematic game_lights_out.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Game lights out design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers82.5 × 93 mm
- 2 layers120.5 × 120.5 mm
- 2 layers120 × 120 mm
FAnaliDoshi E134 IPDTask01
fanalidoshi456-maker/AVR-microcontroller
PCB design using Atmega328P
37 parts - 2 layers105.4 × 91.4 mm
- 4 layers117 × 113.8 mm
- 2 layers120 × 120 mm
- 2 layers63.5 × 64 mm
