
OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

Turns 48V into 12 V and 5 V
X17-Power Slab Master is an open-source printed circuit board by purduerov, from the purduerov/X17-Power-Slab repository on GitHub. It is a 2-layer board of 129.5 × 99 mm with 31 parts on 32 nets, routed with 118 tracks and 13 vias.
Its parts include 6 resistors, 5 diodes, 3 capacitors, 3 connectors and 2 ICs.
Turns 48V into 12 V and 5 V
Whenever you make a new part, download the datasheet and save it here and with the part in the parts library
Always pull other people's changes before beginning to work
git pull
Be sure to push your changes after working on them. Run:
git add . to add any files in this directory or a subdirectory
or git add -u to add any modified filesgit clean -nX to see what ignored files can be removed
git clean -fX removes ignored files (Eagle backups)git commit -m "helpful commit message" with a description of the work that you didgit push to push your work to githubOther helpful commands
git status says information about modified and staged filesgit log shows the recent commits of the repositorygit log filename.extension show the recent commits for just that filegit checkout first-couple-letter-of-commit-id lets you go back to a previous versiongit checkout master brings you back to the latest commitgit tag lists the tagsgit tag -a orderX -m "the version of the board placed for the X'th order" tag a specific commitgit push --tags needed to push tags to remotegit show orderX show the commit log for the given taggit checkout orderX go back and interact with the files at the tagged commit| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | TestPoint | TestPoint:TestPoint_Pad_D4.0mm | TP2, TP3, TP5, TP6, TP14, TP15 |
| 5 | 6-32-HOLE | X16_PowerSlab_V2:6-32-HOLE | H1, H1, H1, H3, H4 |
| 3 | C | Brick Decoupling Capacitors:CAP_50TPV_10x10.5_RBY | C5, C6, C7 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 12V | Red LED:WL-SMCW_0805 | D3 |
| 1 | 150 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 250 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 402k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 48V | Red LED:WL-SMCW_0805 | D2 |
| 1 | 5V | Red LED:WL-SMCW_0805 | D4 |
| 1 | 796636-6 | footprints:CON6_P5MM_VER_TERM-BLK_TYC | J3 |
| 1 | Conn_01x12_Pin | DataConv Connector:Data Conversion two 1x6 | J1 |
| 1 | D_TVS | Diode_SMD:D_SMB_Handsoldering | D5 |
| 1 | ET60T-D04-3-08-D04-X-R1-S | ET60T-D04-3-08-D04-S-R1-S:SAMTEC_ET60T-D04-3-08-D04-S-R1-S | J2 |
| 1 | PZU15B3A,115 | Diode_SMD:D_MiniMELF | D1 |
| 1 | TSM340N06CP ROG | Reverse Voltage Protection:TRANS_TSM340N06CPROG | Q2 |
| 1 | ~ | 48Vto5V:PKU5000e | U5 |
| 1 | ~ | BMR491_MadeByMe:BMR4910203851 | U8 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.


It measures 129.5 × 99 mm and has 2 copper layers, 1.6 mm thick.
31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the purduerov/X17-Power-Slab repository on GitHub, at the commit this page was made from: the board is X17-Power-Slab-master/X17-Power-Slab-Master/X17-Power-Slab-Master.kicad_pcb and its schematic X17-Power-Slab-master/X17-Power-Slab-Master/24V_output_powerslab.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask purduerov before reusing the design.