2 layers59 × 42 mm
4 layers100 × 40 mm
FPix2DTB up
psi46/psi46-pcbContains the following PCB: - Module PCB - module-adapter-FPix: The module adapter used to connect FPix modules to a DTB - module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over…
- Size
- 100 × 40 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 36
- Pads
- 241
- Tracks, vias
- 571, 55
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Sep 2015
- Updated
- 16 Sep 2015
Overview
FPix2DTB up is an open-source printed circuit board by psi46, from the psi46/psi46-pcb repository on GitHub. It is a 4-layer board of 100 × 40 mm with 62 parts on 36 nets, routed with 571 tracks and 55 vias.
It is built around the 24C02. Its parts include 25 resistors, 18 connectors, 6 capacitors, 3 ICs and 1 diode.
Main components
1README
README.mdpsi46-pcb
Collection of PCBs designed for PSI46 projects
Contains the following PCB:
- Module PCB
- module-adapter-FPix: The module adapter used to connect FPix modules to a DTB
- module-adapter-active-BPix: The module adapter to be used to connect BPix modules to a DTB over a low-impedance cable. Has active components on it to refresh signals.
- Single ROC PCB
- singleroc-adapter-testbeam: A shortened version of the PSI single ROC adapter
- singleroc-carrier-testbeam:
- Test PCB
- module-DTBtest-FPix: A board that resembles the passive/ohmic behaviour of a FPix module to test DTB readings of IA, ID, RTD-temperature and HV
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 39 | SM0402 | R9, R12, R13, R16, R17, R20 |
| 4 | 10G | SM0402 | R6, R10, R14, R18 |
| 4 | M2 | lochM2 | loch, loch, loch, loch |
| 3 | 100n | SM0603 | C1, C3, C4 |
| 3 | 10k 0.1% | SM0603 | R22, R25, R26 |
| 3 | 91 | SM0402 | R11, R15, R19 |
| 3 | R | Resistors_SMD:R_0402 | R1, R2, R3 |
| 2 | 0 | SM0402 | R5, R8 |
| 2 | 10k 5% | SM0603 | R23, R24 |
| 2 | 1u | SM0603 | C2, C5 |
| 1 | 120 | SM0402 | R7 |
| 1 | 24C02 | SO8N | U1 |
| 1 | 3V3 | testpad | P9 |
| 1 | 4.7u | SM0603 | C6 |
| 1 | 56 | SM0603 | R21 |
| 1 | CLK+ | testpad | P12 |
| 1 | CLK- | testpad | P13 |
| 1 | CONN-SCSI68 | SCSI68up | J1 |
| 1 | CONN-SMK20 | SMK20hv | J2 |
| 1 | CTR+ | testpad | P8 |
| 1 | CTR- | testpad | P11 |
| 1 | DLT | Active-FPix:QFN24 | U3 |
| 1 | FUSE | SM0603 | F1 |
| 1 | GND | testpad | P14 |
| 1 | JUMPER | PIN_ARRAY_2X1 | JP2 |
| 1 | JUMPER | HarwinShortLnk | JP1 |
| 1 | LED | LED-0603 | D1 |
| 1 | LOGO | NLOGO | G*** |
| 1 | LOGO | LOGO | G*** |
| 1 | OutA+ | testpad | P1 |
| 1 | OutA- | testpad | P2 |
| 1 | RDa+ | testpad | P3 |
| 1 | RDa- | testpad | P5 |
| 1 | RTD+ | testpad | P15 |
| 1 | RTD- | testpad | P16 |
| 1 | SDA+ | testpad | P6 |
| 1 | SDA- | testpad | P7 |
| 1 | TPS769XX | SOT-23-5 | U2 |
| 1 | VA | testpad | P4 |
| 1 | VD | testpad | P10 |
Similar boards
- 2 layers50.3 × 50 mm
- 2 layers64 × 50.1 mm
- 4 layers
3D Printer Board
koson/3D-Printer-Board
A custom, high powered 3d printer controller board designed to run up to 9 stepper drivers, with various peripherals and controls.
511 parts - 4 layers150 × 80 mm
Mek output expander
mekatrol/electronics
This repository contains the electronics, embedded firmware, support software, and reference material for a collection of home-automation and workshop projects.
132 parts - 4 layers25.4 × 25.4 mm
Twonkie
dojoe/Twonkie
A USB-PD sniffer/injector/sink based on Google's Twinkie, re-designed to be manufactured by mere mortals.
62 parts415 - 4 layers48 × 80 mm
- 4 layers138 × 50 mm
Questions
How big is the FPix2DTB up PCB?
It measures 100 × 40 mm and has 4 copper layers, 1.6 mm thick.
What parts does the FPix2DTB up use?
62 parts, built around the 24C02. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FPix2DTB up KiCad files?
From the psi46/psi46-pcb repository on GitHub, at the commit this page was made from: the board is Active-FPix/FPix2DTB_up.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FPix2DTB up design in my own project?
Its repository states no licence, so its author keeps all rights: ask psi46 before reusing the design.