
Pico2w drv8835 control
pscmps/planar-stepper-flex
Pico 2 W and DRV8835 planar stepper flex PCB release candidate

Pico 2 W and DRV8835 planar stepper flex PCB release candidate
Drv8835 driver module is an open-source printed circuit board by pscmps, from the pscmps/planar-stepper-flex repository on GitHub. It is a 2-layer board of 48 × 60 mm with 27 parts on 20 nets, routed with 238 tracks and 0 vias.
Its parts include 8 resistors, 5 connectors, 4 capacitors and 4 ICs. It belongs with the RP2040 boards of this library.
Pico 2 WとAE-DRV8835-S 4個を載せ、A/B/C/D相を個別駆動する2層基板です。
A+ / A- / B+ / B-C+ / C- / D+ / D-

GPIO、AS5600、サーボ、将来microSDの割当は../../docs/wiring.mdを参照してください。VM_X/VM_Yを共通化する場合は両方のVMはんだジャンパを閉じ、電源入力は片側だけを使います。
製造ZIP、BOM、DRCレポートは../../manufacturing/v0.1.0/pico2w-drv8835-controller/にあります。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k PULLDOWN | R1, R2, R3, R4, R5, R6, R7, R8 | |
| 4 | MountingHole_3.2mm | H1, H2, H3, H4 | |
| 2 | 0.1uF | C3, C4 | |
| 2 | 470uF 16V | C1, C2 | |
| 2 | VM_X-VM_Y LINK | SJ1, SJ2 | |
| 1 | AE-DRV8835-S PHASE A | U1 | |
| 1 | AE-DRV8835-S PHASE B | U2 | |
| 1 | AE-DRV8835-S PHASE C | U3 | |
| 1 | AE-DRV8835-S PHASE D | U4 | |
| 1 | MCU INPUT X/Y 2x6 | J1 | |
| 1 | X OUTPUT | J4 | |
| 1 | X POWER | J2 | |
| 1 | Y OUTPUT | J5 | |
| 1 | Y POWER | J3 |

pscmps/planar-stepper-flex
Pico 2 W and DRV8835 planar stepper flex PCB release candidate

pscmps/planar-stepper-flex
Pico 2 W and DRV8835 planar stepper flex PCB release candidate

pscmps/planar-stepper-flex
Pico 2 W and DRV8835 planar stepper flex PCB release candidate


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.

freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
It measures 48 × 60 mm and has 2 copper layers, 1.6 mm thick.
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pscmps/planar-stepper-flex repository on GitHub, at the commit this page was made from: the board is hardware/drv8835-driver-module/drv8835_driver_module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pscmps before reusing the design.