
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Sled is an open-source printed circuit board by prs2026, from the prs2026/recoverytestrocket repository on GitHub, published under the MIT licence. It is a 2-layer board of 185.2 × 33 mm with 30 parts on 22 nets, routed with 134 tracks and 7 vias.
Its parts include 9 connectors and 2 switches.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | MountingHole | .pretty:MountingHole_2.2mm_M3_DIN965_Pad_1 | H5, H6, H7, H8, H9, H10, H11, H12, H13, H14 |
| 4 | MountingHole | .pretty:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 2 | DCDC1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9, J10 |
| 2 | Ezmini1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J11 |
| 2 | SW_DPST_x2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | SW1, SW2 |
| 1 | 1s1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT2 |
| 1 | 1s2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT3 |
| 1 | 1s3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT4 |
| 1 | 2s | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | FWGPS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | LEO1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LEO2 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Strat1 | .pretty:PinHeader_1x04_P3.08mm_Vertical | J4 |
| 1 | camera | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 185.2 × 33 mm and has 2 copper layers, 1.6 mm thick.
30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the prs2026/recoverytestrocket repository on GitHub, at the commit this page was made from: the board is Hardware/sled/sled.kicad_pcb and its schematic Hardware/sled/sled.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).