Skip to the content
2 layers22.7 × 33 mmMux driver v1, the printed circuit board in 3D

Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

Size
22.7 × 33 mm
Copper layers
2
Thickness
1.63 mm
Parts
13
Nets
39
Pads
128
Tracks, vias
254, 41
Pours
106
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
19 Jun 2023
Updated
7 Oct 2025

Overview

Mux driver v1 is an open-source printed circuit board by proveskit, from the proveskit/development_boards repository on GitHub. It is a 2-layer board of 22.7 × 33 mm with 13 parts on 39 nets, routed with 254 tracks and 41 vias.

Its parts include 7 connectors, 4 resistors and 2 ICs.

README

README.md

development_boards

Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

flat_sat_dev_board

This board is intended to be a "FlatSat" stand in for all of the core hardware of the PROVES Kit! By putting all of the microcontrollers, sensors, and communications hardware on one convenient board you can carry it around with you where ever you'd like!

Find a link to the documentation for that here!

Camera_board_v2

This board is currently being developed for the Irvington High School Girls in STEM Club team, who are looking to fly a camera on Pleiades - Orpheus.

Mux_driver_board_v1

This board is a breakout hosting both the TCA I2C Multiplexer and an I2C based LED driver. It is intended to be mounted as a daughter card on another PCB and used to provide access to additional protected I2C buses.

FC_Advanced_Carrier

This is the initial design for a board that is able to accept an NVIDIA Jetson Nano SoM.

Parts

13
QtyValueFootprintReferences
310kResistor_SMD:R_Array_Convex_4x0603R1, R2, R4
2Conn_01x11Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_VerticalJ4, J6
2I2C0 BreakoutConnector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_VerticalJ1, J3
2I2C1 BreakoutConnector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_VerticalJ2, J5
110KResistor_SMD:R_0603_1608MetricR3
1I2C1 BreakoutConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ7
1PCA9685PW,118PCA9685:SOP65P640X110-28NIC1
1TCA9548APWRTCA9548APWR:SOP65P640X120-24NU1

More from proveskit/development_boards

7
  • 4 layers141.6 × 116.1 mmFlat sat dev board, the printed circuit board in 3D

    Flat sat dev board

    proveskit/development_boards

    Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

    371 parts1
  • 4 layers88 × 94.5 mmFlight computer dev board sx1276, the printed circuit board in 3D

    Flight computer dev board sx1276

    proveskit/development_boards

    Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

    183 parts1
  • 4 layers88 × 94.5 mmFlight computer dev board rfm98pw, the printed circuit board in 3D

    Flight computer dev board rfm98pw

    proveskit/development_boards

    Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

    130 parts1
  • 4 layers106.5 × 99 mmHat board, the printed circuit board in 3D

    Hat board

    proveskit/development_boards

    Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

    108 parts1
  • 4 layers88 × 94.5 mmFlight computer dev board rfm98pw, the printed circuit board in 3D

    Flight computer dev board rfm98pw

    proveskit/development_boards

    Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

    103 parts1
  • 4 layers100 × 100 mmAntenna top cap, the printed circuit board in 3D

    Antenna top cap

    proveskit/development_boards

    Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

    61 parts1
  • 2 layers21.4 × 37.8 mmCamera v2, the printed circuit board in 3D

    Camera v2

    proveskit/development_boards

    Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

    30 parts1

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Mux driver v1 PCB?

It measures 22.7 × 33 mm and has 2 copper layers, 1.63 mm thick.

What parts does the Mux driver v1 use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mux driver v1 KiCad files?

From the proveskit/development_boards repository on GitHub, at the commit this page was made from: the board is Mux_Driver_board_v1/mux_driver_v1.kicad_pcb and its schematic Archive/Camera_board_v1/camera_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mux driver v1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask proveskit before reusing the design.