
Flat sat dev board
proveskit/development_boards
Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.
Antenna top cap is an open-source printed circuit board by proveskit, from the proveskit/development_boards repository on GitHub. It is a 4-layer board of 100 × 100 mm with 61 parts on 65 nets, routed with 455 tracks and 69 vias.
It is built around the AS193-73LF, VL6180XV0NR/1 and BM04B-SRSS-TB(LF)(SN), with the BSS138 among its other parts. Its parts include 18 connectors, 9 resistors, 7 ICs, 6 capacitors and 5 diodes. It belongs with the radio and wireless boards of this library.
Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.
This board is intended to be a "FlatSat" stand in for all of the core hardware of the PROVES Kit! By putting all of the microcontrollers, sensors, and communications hardware on one convenient board you can carry it around with you where ever you'd like!
Find a link to the documentation for that here!
This board is currently being developed for the Irvington High School Girls in STEM Club team, who are looking to fly a camera on Pleiades - Orpheus.
This board is a breakout hosting both the TCA I2C Multiplexer and an I2C based LED driver. It is intended to be mounted as a daughter card on another PCB and used to provide access to additional protected I2C buses.
This is the initial design for a board that is able to accept an NVIDIA Jetson Nano SoM.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | BM04B-SRSS-TB(LF)(SN) | Antenna_board:JST_BM04B-SRSS-TB(LF)(SN) | J4, J8, J9, J12, J14, J16, J17, J18 |
| 7 | TestPoint | MountingHole:MountingHole_2.7mm_M2.5_Pad | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 6 | LOGO | LOGO | G***, G***, G***, G***, G***, G*** |
| 5 | 1K | Resistor_SMD:R_0402_1005Metric | R1, R5, R6, R7, R8 |
| 5 | Blue | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5 |
| 4 | USB_B_Micro | Antenna_board:MOLEX_105164-0001(round) | J10, J11, J13, J15 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 0433BM15A0001 | RF_Converter:Balun_Johanson_0896BM15A0001 | U3 |
| 1 | 100nf | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 100pf | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 10K | Resistor_SMD:R_Array_Convex_4x0603 | R3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | AS193-73LF | Package_TO_SOT_SMD:SuperSOT-6 | U4 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | Battery Charge Bypass | Picolock2Pos:MOLEX_504050-0291 | J2 |
| 1 | Battery Charge Bypass | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Burn_Wire | Picolock2Pos:MOLEX_504050-0291 | J3 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J5 |
| 1 | LP5907-2.8V | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | PCT2075DP,118 | Package_SO:TSSOP-8_3x3mm_P0.65mm | IC1 |
| 1 | RFM98PW | Antenna_board:RFM98PW | U5 |
| 1 | RFM9xBreakout | Antenna_board:HOPERF_RFM95W_SMD | U6 |
| 1 | VL6180XV0NR/1 | Adafruit VL6180 Time of Flight Sensor:VL6180 | U1 |
| 1 | ~ | Antenna_board:Tape_Measure_Antenna | J6 |
| 1 | ~ | Antenna_board:Burn_Wire | J7 |
The 59 most common of 61 parts.

proveskit/development_boards
Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

proveskit/development_boards
Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

proveskit/development_boards
Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

proveskit/development_boards
Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

proveskit/development_boards
Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

proveskit/development_boards
Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

proveskit/development_boards
Miscellaneous dev boards to test the components of the PROVES Kit on a smaller scale.

proveskit/antenna-board
The PROVES Kit Antenna Boards! By convention the Z+ Top Cap of the satellite.

proveskit/flight_controller_board
The main flight computer board for the PROVES Kit.



opentac/opentac
OpenTac: open tools to design, fabricate, read and simulate flex-PCB tactile skins that sense normal and shear force, for any robot surface.

antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/

antmicro/kintex-410t-devboard
This repository contains open hardware design files for a devkit created for AMD-Xilinx Kintex-7 K410T FPGA.
It measures 100 × 100 mm and has 4 copper layers, 1.61 mm thick.
61 parts, built around the AS193-73LF, VL6180XV0NR/1, BM04B-SRSS-TB(LF)(SN) and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the proveskit/development_boards repository on GitHub, at the commit this page was made from: the board is Archive/antenna_top_cap_board/antenna_top_cap_V1/antenna_top_cap.kicad_pcb and its schematic Archive/Camera_board_v1/camera_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask proveskit before reusing the design.