
Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover

Fifth project is an open-source printed circuit board by projects-harishwa, from the projects-harishwa/Buck-Converter repository on GitHub. It is a 2-layer board of 60.5 × 74.5 mm with 11 parts on 11 nets, routed with 145 tracks and 15 vias.
It is built around the IRFZ44N. Its parts include 3 resistors, 2 capacitors, 2 diodes, 2 connectors and 1 IC.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1 |
| 1 | 100nF | Capacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2 |
| 1 | 1nF | Capacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C3 |
| 1 | 200 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R3 |
| 1 | D | Diode_THT:D_5KPW_P7.62mm_Vertical_AnodeUp | D1 |
| 1 | IN4001 | Diode_THT:D_5KPW_P7.62mm_Vertical_AnodeUp | D2 |
| 1 | IRFZ44N | Package_DirectFET:DirectFET_ST | Q2 |
| 1 | LMC555xM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Output 1 | Connector:CUI_PD-30S | J2 |
| 1 | Output 1 | Connector:CUI_PD-30 | J1 |

NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover


NikodemBartnik/Pico-Watering-System
Raspberry Pi Pico based automated watering system for your garden

BenjamimKrug/robo_humanoide
Repositorio para arquivos gerais necessários para o desenvolvimento do Robô humanoide

2technology/g-board
ESP32 IoT Home automation PCB - 1 * 12V relay, 4 * input button connector with HW debounce, 4 * ws2812b output

AvishkaVishwa/12V-DC-Motor-Speed-Controller-PCB-Design-using-KiCAD
using 555 timer is at Astable mode

RichardBenear/DDScopeX-Hardware
Hardware documentation for Direct Drive Scope

paulmikael02/ESP32-BLDC-Motor-Controller
ESP32-based BLDC motor controller built with ESP-IDF, utilizing Hall sensors and the hardware MCPWM peripheral.
It measures 60.5 × 74.5 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the IRFZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the projects-harishwa/Buck-Converter repository on GitHub, at the commit this page was made from: the board is fifth_project.kicad_pcb and its schematic fifth_project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask projects-harishwa before reusing the design.