Skip to the content
2 layers48 × 94 mmCvtnithm nu, the printed circuit board in 3D

Conversion PCB to allow a Chunithm (or similar) cab to connect to an ALLS

Size
48 × 94 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
48
Pads
78
Tracks, vias
50, 0
Pours
3
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
7 Jan 2024
Updated
9 Feb 2025

Overview

Cvtnithm nu is an open-source printed circuit board by progmem, from the progmem/cvtnithm repository on GitHub. It is a 2-layer board of 48 × 94 mm with 11 parts on 48 nets, routed with 50 tracks and 0 vias.

README

README.md

CVTnithm

CVTnithm is a cable adapter in PCB form. That's about it!

Thanks to @48productions who made a guide on how to make all the necessary wiring and made me realize:

  • Digikey doesn't sell the crimpable version of the connector
  • I'm not buying a single part from JST directly
  • also i don't want to buy a specialty crimper for molex pins (except i kinda had to for handling ac power lmao)
  • also i'm lazy, but not lazy enough to make a pcb

I'm sorry I didn't have a creative name for this project

To build this, you will need the following components:

  • For the serial connections:
  • For the power connections:
  • A CVTnithm PCB. Two options are provided:
    • The alls folder contains the PCB files used for an ALLS, such as an ALLS UX.
    • The nu-alls folder contains the PCB files for a Nu1.1-ALLS conversion.

Connecting this board internally requires the following:

  • (3) 2x5 IDC cables, such as these on Amazon. The cables should be a straight connection without any twists or other modification.

Solder each of these connectors in their respective places; each connector has a unique footprint so it should be fairly obvious what connectors need to go where. Be mindful of orientation!

So I soldered this, now what?

  • On an ALLS, remove the serial brackets by undoing the two PCI bracket screws, unplugging them from the motherboard in the process.
  • Locate a suitable set of power cables.
    • In an ALLS, locate the collection of unused power supply cables. Undo this bundle and find a cable containing two PC 4-pin power connectors and a floppy drive connector.
    • In a Nu1.1-ALLS conversion, this will vary wildly depending on the power supply used. You will need two PC 4-pin power connectors, from one or two cables.
  • Note the COM_ number on each of the serial ports on the motherboard. Plug one IDC cable into each of the serial ports. Plug the other end into the CVTnithm PCB into its respective COM_ port.
  • Plug in the two PC 4-pin power connectors.

How do I mount the ALLS PCB?

Print the two 3MF files in the alls folder in the orientations provided. The bottom bracket requires support material, and it's recommended to disable support for bridges as a small tool (like a dental pick) will be needed to clean out some of the support material otherwise. If you cannot disable support for bridges (due to slicer or printer limitations), you may try printing with the part upside-down as this will allow you to more easily clean out the support material.

With the rear of the ALLS facing you (herein described as the "front"), install everything as follows:

  • Insert the bottom bracket into the two empty PCI slots from the front. The flat side should be facing you, with the U shape upward.
  • Slide the bottom bracket as far down as you can. The metal of the PCI bracket should slide into a notch in the print.
  • Looking at the ALLS from the top, fit the CVTnithm PCB into the notch in the bottom bracket. The CVTnithm board will be installed inside the ALLS, with the IDC connectors facing downward.
  • Place the top bracket over the CVTnithm PCB so the flat side is facing you, with the screw hole towards you. Reinstall the two PCI screws, making sure the CVTnithm PCB is retained by the bracket.

How do I mount the Nu1.1-ALLS PCB?

Install the CVTnithm PCB where the AMEX PCB was previously installed with four screws. Text should be upright with the serial and DC output connectors facing outward.

Parts

11
QtyValueFootprintReferences
3Conn_02x05_Odd_EvenConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalCOM2, COM3, COM4
2Conn_01x04_PinConnector_TE-Connectivity:TE_MATE-N-LOK_350211-1_1x04_P5.08mm_VerticalPWR1, PWR2
1Conn_02x07_Top_BottomConnector_Molex:Molex_Mini-Fit_Jr_5566-14A_2x07_P4.20mm_VerticalCPWR1
1Conn_02x11_Odd_EvenConnector_JST:JST_XAD_B22B-XADSS-1_2x11_P2.50mm_VerticalCCOM1

The 7 most common of 11 parts.

More from progmem/cvtnithm

1
  • 2 layers31.8 × 101.6 mmCvtnithm, the printed circuit board in 3D

    Cvtnithm

    progmem/cvtnithm

    Conversion PCB to allow a Chunithm (or similar) cab to connect to an ALLS

    7 parts5

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the Cvtnithm nu PCB?

It measures 48 × 94 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Cvtnithm nu use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cvtnithm nu KiCad files?

From the progmem/cvtnithm repository on GitHub, at the commit this page was made from: the board is nu-alls/cvtnithm_nu.kicad_pcb and its schematic alls/cvtnithm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cvtnithm nu design in my own project?

Its repository states no licence, so its author keeps all rights: ask progmem before reusing the design.