2 layers65 × 56.5 mm
2 layers50.8 × 22.9 mm
Feather UWB
ProfFan/MagicLoc-DWM30002- Size
- 50.8 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 42
- Pads
- 90
- Tracks, vias
- 88, 35
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jan 2024
- Updated
- 23 Jan 2024
Overview
Feather UWB is an open-source printed circuit board by ProfFan, from the ProfFan/MagicLoc-DWM3000 repository on GitHub. It is a 2-layer board of 50.8 × 22.9 mm with 22 parts on 42 nets, routed with 88 tracks and 35 vias.
It is built around the DWM1000. Its parts include 5 resistors, 4 capacitors, 4 diodes, 3 connectors and 1 switch. It belongs with the radio and wireless and microcontroller boards boards of this library.
Main components
1README
README.mdMagicLoc DWM3000 module carrier
LICENSE
CERN OHL-W v2, See LICENSE
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 470 | Resistor_SMD:R_0603_1608Metric | R1, R2, R4 |
| 3 | C_Small | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 750 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | C_Small | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | DWM1000 | RF_Module:DWM1000 | DWM1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_B3U-3000P | SW1 |
| 1 | RX | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | RXOK | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SFD | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | TX | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | feather long | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J1 |
| 1 | feather short | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J2 |
The 18 most common of 22 parts.
Questions
How big is the Feather UWB PCB?
It measures 50.8 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Feather UWB use?
22 parts, built around the DWM1000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Feather UWB KiCad files?
From the ProfFan/MagicLoc-DWM3000 repository on GitHub, at the commit this page was made from: the board is Feather_UWB.kicad_pcb and its schematic Feather_UWB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Feather UWB design in my own project?
Its repository states no licence, so its author keeps all rights: ask ProfFan before reusing the design.
Similar boards
- 2 layers115 × 115 mm
- 2 layers40.1 × 70.1 mm
ESP32-DWM1000-local
jh247247/DW1000-fan-video
Using UWB to make an indoor location system, to get a fan to point at me.
53 parts3 - 2 layers45 × 45 mm
UWB module
repowered-electronics/UWB_Module_Hardware
Hardware files for our DWM1000 based localization module
50 parts2 - 2 layers24.5 × 25 mm
DWM1000 Breakout
JEB12345/DWM100_Breakout
A Breakout board to mount a DWM1000 module onto SUPERball's XBee WiFi slot on the Sensor Board
18 parts1Apache-2.0 - 4 layers26.5 × 57.4 mm
MotorDriver
Kmshanley/MiniRobots
Firmware and PCB desgin for mini robots with UWB localization and lidar mapping
50 parts1 - 2 layers38.8 × 29.5 mm
- 2 layers82.8 × 42.3 mm
TBP
AAPythonCode/TBP
It's summer break, and I want to create something cool! Since I play tennis on a daily basis, I thought of creating something related to it.
33 partsCC0-1.0