4 layers106 × 110 mm
RearCircuitBoard 10
ssbingo/samba-solar-track
Samba Solar Track – Solarnachführung mit Sturmschutz: Handbuch, Platine und Gehäuse für den Nachbau (10,1-Zoll-Version)
329 parts
2 layers100 × 34 mm
SuperProbe
profdc9/SuperProbe12A single PCB implementation of Carlson's superprobe in Kicad
- Size
- 100 × 34 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 28
- Pads
- 146
- Tracks, vias
- 604, 215
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Apr 2020
- Updated
- 7 May 2020
Overview
SuperProbe is an open-source printed circuit board by profdc9, from the profdc9/SuperProbe repository on GitHub. It is a 2-layer board of 100 × 34 mm with 74 parts on 28 nets, routed with 604 tracks and 215 vias.
It is built around the MMBT3904, 1N4148WS and SS8050, with the SS8550 among its other parts. Its parts include 24 connectors, 17 resistors, 15 capacitors, 7 diodes and 7 transistors.
Main components
4
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
SS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)SS8550
SOT-23-55℃~+150℃ 1 PNP 1.5A 100MHz 100nA 120 25V 300mW 500mV 5V PNP SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdThis is a KiCad implementation of Carlson's Superprobe by Daniel L. Marks, KW4TI.
It integrates the probe into the PCB by using the ground plane and vias to shield the probe. The solder mask is left off of the area around the probe so that the probe can be taped over with copper or aluminum tape for extra shielding.
The PCB design is distributed under the Creative Commons Shared Alike Attribution (CC-BY-SA 4.0) license.
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | Conn_01x01 | SuperProbe:BigSlot | J2, J3, J4, J5, J6, J7, J10, J11, J12, J13, J14, J15, J20, J21, J22, J23 +2 |
| 6 | Conn_01x01 | SuperProbe:PadHole | J1, J16, J17, J18, J19, J24 |
| 5 | 1 uF | Capacitors_SMD:C_0805_HandSoldering | C9, C11, C12, C13, C14 |
| 5 | 1k | Resistors_SMD:R_0805_HandSoldering | R2, R5, R11, R13, R14 |
| 5 | MMBT3904 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 4 | 22 uF | Capacitors_SMD:C_0805_HandSoldering | C2, C4, C7, C16 |
| 4 | 2M2 | Resistors_SMD:R_0805_HandSoldering | R1, R4, R7, R9 |
| 3 | 100 nF | Capacitors_SMD:C_0805_HandSoldering | C5, C6, C10 |
| 3 | 15k | Resistors_SMD:R_0805_HandSoldering | R3, R6, R12 |
| 2 | 10 nF | Capacitors_SMD:C_0805_HandSoldering | C1, C3 |
| 2 | 10k | Resistors_SMD:R_0805_HandSoldering | R15, R16 |
| 2 | 1N4148WS | Diodes_SMD:D_SOD-323_HandSoldering | D1, D2 |
| 2 | 1N4148WS | Diodes_SMD:D_SOD-323 | D7, D8 |
| 2 | LED | LEDs:LED_0805_HandSoldering | D4, D6 |
| 1 | 100k | Potentiometers:Potentiometer_Triwood_RM-065 | RV1 |
| 1 | 2k7 | Resistors_SMD:R_0805_HandSoldering | R8 |
| 1 | 330 pF | Capacitors_SMD:C_0805_HandSoldering | C8 |
| 1 | 330k | Resistors_SMD:R_0805_HandSoldering | R10 |
| 1 | 47R | Resistors_SMD:R_0805_HandSoldering | R17 |
| 1 | LM78M05_TO252 | TO_SOT_Packages_SMD:TO-252-3_TabPin2 | U1 |
| 1 | LRB751V | Diodes_SMD:D_SOD-323_HandSoldering | D5 |
| 1 | SS8050 | TO_SOT_Packages_SMD:SOT-23 | Q6 |
| 1 | SS8550 | TO_SOT_Packages_SMD:SOT-23 | Q7 |
| 1 | SW_DPDT_x2 | SuperProbe:DPDTsmallswitch | SW2 |
| 1 | SW_SPDT | SuperProbe:DPDTsmallswitch | SW1 |
Questions
How big is the SuperProbe PCB?
It measures 100 × 34 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SuperProbe use?
74 parts, built around the MMBT3904, 1N4148WS, SS8050 and SS8550. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SuperProbe KiCad files?
From the profdc9/SuperProbe repository on GitHub, at the commit this page was made from: the board is SuperProbe.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SuperProbe design in my own project?
Its repository states no licence, so its author keeps all rights: ask profdc9 before reusing the design.
Similar boards
- 4 layers243.8 × 171.5 mm
- 2 layers70 × 65 mm
Fluepdot
Fluepke/Fluepdot
Project for controlling Annax flipdot panels used by the Berliner Verkehrsbetriebe
116 parts17AGPL-3.0 - 2 layers101.2 × 199.1 mm
- 4 layers243.8 × 245.5 mm
Neotron Common Hardware
Neotron-Compute/Neotron-Common-Hardware
Contains KiCad footprints and symbols shared across multiple Neotron projects.
287 parts4CC-BY-SA-4.0 - 2 layers100 × 120 mm
FlipperKapr
krasavic3-wittmayer/FlipperKapr
Flipper Kapr is a DIY Arduino-based experimental device, inspired by tools like Flipper Zero. Its purpose is learning, experimentation, and exploration of embedded systems and communication protocols, not hacking or…
60 parts3MIT - 2 layers86 × 65 mm
- 2 layers153.6 × 50 mm
