Skip to the content
2 layers100 × 48 mmFloppy adapter, the printed circuit board in 3D

5.25" floppy connector to 3.5" adapter for NEC PC-8801 FA

Size
100 × 48 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
18
Pads
70
Tracks, vias
188, 0
Pours
4
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
16 Nov 2023
Updated
26 Jun 2024

Overview

Floppy adapter is an open-source printed circuit board by proboterror, from the proboterror/PC-8801FA-floppy-edge-connector-adapter repository on GitHub. It is a 2-layer board of 100 × 48 mm with 4 parts on 18 nets, routed with 188 tracks and 0 vias.

It belongs with the interfaces and adapters boards of this library.

README

README.md

5.25" floppy connector to 3.5" adapter for NEC PC-8801 FA

Based on Leaded Solder's 5.25" Floppy edge connector to 34-pin 3.5" floppy drive adapter

Changes:

  • Connector wiring flip upside down
  • Enlarged PCB with mounting holes for Espada EHD-BR355SS adapter

Intended to use with:

  • Espada EHD-BR355SS 3.5" to 5.25" multi-functional bracket to 5.25" PC drive bay
  • GOTEK floppy drive emulator
  • 2.54mm pitch 10cm Flat Ribbon Cable FC-34P (2x17 34Pin)

Schematics:
Scheme

Board view:
Top Bottom

Assembled boards:

Parts

4
QtyValueFootprintReferences
2,
1Edge ConnectorEdgeConnectors:FloppyEdgeJ2
1Female Floppy ConnectorConnector_PinHeader_2.54mm:PinHeader_2x17_P2.54mm_VerticalJ1

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

How big is the Floppy adapter PCB?

It measures 100 × 48 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Floppy adapter use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Floppy adapter KiCad files?

From the proboterror/PC-8801FA-floppy-edge-connector-adapter repository on GitHub, at the commit this page was made from: the board is floppy-adapter.kicad_pcb and its schematic floppy-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Floppy adapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask proboterror before reusing the design.