

Electric AI Wheelchair
Manual wheelchair turned electric! This wheelchair uses electronic components such as modules and a PCB to make this wheelchair much for user interactive (and helps make life easier when you can't walk).
- Size
- 216.3 × 115.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 129
- Nets
- 201
- Pads
- 647
- Tracks, vias
- 4,035, 500
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 Jul 2025
- Updated
- 30 Aug 2026
Overview
Electric AI Wheelchair is an open-source printed circuit board by prisca7c, from the prisca7c/Customized-AI-Electric-Wheelchair repository on GitHub. It is a 2-layer board of 216.3 × 115.1 mm with 129 parts on 201 nets, routed with 4,035 tracks and 500 vias.
It is built around the ATMEGA2560-16AU, BTS7960B and L298N, with the AMS1117-3.3, BSS138 and XT60-M among its other parts. Its parts include 26 resistors, 25 capacitors, 24 connectors, 19 diodes and 10 ICs. It belongs with the ESP32, AVR (ATmega, ATtiny) and RISC-V boards of this library.
Main components
6ATMEGA2560-16AU
TQFP-100(14x14)-40℃~+85℃ 10bit 16MHz 256KB 4.5V~5.5V 4KB 8 Bit 86 8KB AVR Built-in FLASH TQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)BTS7960B
TO-263-7-40℃~+150℃ 1us 1us 5.5V~27.5V 7uA Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge MOSFET TO-263-7 Gate Drivers ROHSInfineon TechnologiesGate DriversL298N
Multiwatt-15-25℃~+130℃ 2 2A 4.5V~7V Bipolar Driver Overcurrent Protection、Over temperature protection Yes Multiwatt-15 Stepper Motor Driver ROHSHGSEMIStepper Motor DriverAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsXT60-M
THrough holeTHroughhole New Arrivals ROHSChangzhou Amass ElecUncategorised
README
README.mdCustomized-AI-Electric-Wheelchair
PRISCA CHIEN | U0741Q95Y02
July 27 2025
Manual wheelchair turned electric! This wheelchair uses electronic components such as modules and a PCB to make this wheelchair much for user interactive (and helps make life easier when you can't walk). I built this custom wheelchair because electric wheelchairs cost too much. Also it would be a great gift to my grandpa as he has Parkinson's disease. It has most of the functions on a regular wheelchair (motors, sound, speed, SOS, etc) AND I will be using AI as a healthcare tool in this project.
Full 3D Model of Wheelchair with Electronics (will not have those cuffs IRL 💀)

PCB Schematic

PCB Wiring Diagram (strapping 24V fan on just in case it does overheat), back copper pours for 24V, front copper pours for 12V I can't fit the wires if they're too large

3D View of PCB

Bill of Materials (BOM)
| Reference | Qty | Description | Footprint | Purchase Link | Status |
|---|---|---|---|---|---|
| C1,C2,C3,C4,C6,C20,C23,C25 | 8 | Polarized Capacitor | CP_Radial_D5.0mm_P2.50mm | AliExpress | |
| C5,C7,C8,C9,C10,C11,C12,C13,C14,C15,C16,C17,C18,C19,C22,C24 | 16 | Ceramic Capacitor | C_0603_1608Metric | AliExpress | |
| C21 | 1 | Ceramic Capacitor (45°) | C_0603_1608Metric | AliExpress | |
| D1 | 1 | TVS Diode | D_SMA | AliExpress | |
| D2,D3,D4,D5,D8,D9,D10,D11,D12,D13,D14,D15,D16,D17,D18,D19 | 16 | Schottky Diode | D_SMA | AliExpress | |
| D6,D7 | 2 | LED | LED_D5.0mm | - | ✅ Have |
| F1 | 1 | Fuse | Fuse_BelFuse_0ZRE0005FF | - | ✅ Have |
| J1 | 1 | Buck Converter 24V→5V | PinSocket_1x04_P2.54mm | AliExpress | |
| J2 | 1 | Buck Converter 24V→12V | FanPinHeader_1x04_P2.54mm | AliExpress | |
| J3 | 1 | ICSP Programming Header | PinHeader_2x03_P2.54mm | - | ✅ Have |
| J4 | 1 | USB Serial | PinHeader_1x06_P1.00mm | - | ✅ Have |
| J5 | 1 | Raspberry Pi Zero | Harwin_M20-7812045_2x20 | AliExpress | |
| J8 | 1 | Microphone | PinHeader_1x03_P1.00mm | AliExpress | |
| J9 | 1 | TFT 3.5" Display | PinHeader_1x14_P1.00mm | AliExpress | |
| J10 | 1 | MPU6050 IMU | PinSocket_1x08_P2.54mm | AliExpress | |
| J11 | 1 | DS3231 RTC | PinSocket_1x06_P2.54mm | AliExpress | |
| J12 | 1 | Ultrasonic Sensor 1 | PinHeader_1x04_P1.00mm | - | ✅ Have |
| J13 | 1 | Ultrasonic Sensor 2 | PinHeader_1x04_P1.00mm | - | ✅ Have |
| J14 | 1 | Ultrasonic Sensor 3 | PinHeader_1x04_P1.00mm | - | ✅ Have |
| J15 | 1 | GPS Module | PinHeader_1x04_P1.00mm | AliExpress | |
| J16 | 1 | Joystick Control | PinHeader_1x05_P1.00mm | - | ✅ Have |
| J17 | 1 | Temperature Sensor 1 | PinHeader_1x03_P1.00mm | - | ✅ Have |
| J18 | 1 | Temperature Sensor 2 | PinHeader_1x03_P1.00mm | - | ✅ Have |
| J19 | 1 | Servo 1 | PinHeader_1x02_P1.00mm | - | ✅ Have |
| J20 | 1 | Servo 2 | PinHeader_1x02_P1.00mm | - | ✅ Have |
| J21 | 1 | Linear Actuator | PinHeader_1x02_P1.00mm | - | ✅ Have |
| J22 | 1 | Audio Amplifier (LM386) | PinHeader_1x06_P1.00mm | AliExpress | |
| J23 | 1 | Speaker | PinHeader_1x02_P1.00mm | AliExpress | |
| J24 | 1 | XT60-M Power Connector | AMASS_XT60-M | AliExpress | |
| J25,J26 | 2 | Motor Power Terminals | TerminalBlock_Phoenix_MKDS | AliExpress | |
| Q1,Q2,Q3,Q4 | 4 | BSS138 MOSFET | SOT-23 | AliExpress | |
| R1-R26 | 26 | Resistor | R_0603_1608Metric | - | ✅ Have |
| SW1 | 1 | SPST Switch | SW_PUSH-12mm | AliExpress | |
| SW2-SW9 | 8 | Push Button | SW_PUSH-12mm | AliExpress | |
| U1 | 1 | LM7805 Voltage Regulator | TO-220-3_Vertical | AliExpress | |
| U2 | 1 | AMS1117-3.3 Regulator | SOT-223-3_TabPin2 | AliExpress | |
| U3 | 1 | ATMEGA2560-16AU MCU | TQFP100-0.5-14X14MM | Digi-Key | |
| U4,U5,U6,U7 | 4 | BTS7960B Motor Driver | DPAK127P1490X440-8N | AliExpress | |
| U9,U10 | 2 | L298N Motor Driver | TO-220-15_P2.54x2.54mm | AliExpress | |
| U11 | 1 | ESP32-C3-MINI WiFi Module | XCVR_ESP32-C3-MINI-1-N4 | AliExpress | |
| Y1 | 1 | Crystal Oscillator | Crystal_HC49-4H_Vertical | AliExpress |
Parts
129| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +10 |
| 16 | C | Capacitor_SMD:C_0603_1608Metric | C5, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C22, C24 |
| 16 | D_Schottky | Diode_SMD:D_SMA | D2, D3, D4, D5, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19 |
| 8 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2, C3, C4, C6, C20, C23, C25 |
| 8 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 4 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | BTS7960B | BTS7960B:DPAK127P1490X440-8N | U4, U5, U6, U7 |
| 4 | Conn_01x04 | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical_SMD_Pin1Left | J12, J13, J14, J15 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H5, H6, H7, H8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H9, H10, H11, H12 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical_SMD_Pin1Left | J19, J20, J21 |
| 3 | Conn_01x03 | Connector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_Vertical_SMD_Pin1Left | J8, J17, J18 |
| 2 | Conn_01x06 | Connector_PinHeader_1.00mm:PinHeader_1x06_P1.00mm_Vertical_SMD_Pin1Left | J4, J22 |
| 2 | L298N | Package_TO_SOT_THT:TO-220-15_P2.54x2.54mm_StaggerOdd_Lead5.84mm_TabDown | U9, U10 |
| 2 | LED | LED_THT:LED_D5.0mm | D6, D7 |
| 2 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J25, J26 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | C_45deg | Capacitor_SMD:C_0603_1608Metric | C21 |
| 1 | Conn_01x02 | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical_SMD_Pin1Left | J23 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J1 |
| 1 | Conn_01x04 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05 | Connector_PinHeader_1.00mm:PinHeader_1x05_P1.00mm_Vertical_SMD_Pin1Left | J16 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical_SMD_Pin1Left | J11 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical_SMD_Pin1Left | J10 |
| 1 | Conn_01x14 | Connector_PinHeader_1.00mm:PinHeader_1x14_P1.00mm_Vertical_SMD_Pin1Left | J9 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x20_Odd_Even | Connector_Harwin:Harwin_M20-7812045_2x20_P2.54mm_Vertical | J5 |
| 1 | Crystal | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | D_TVS | Diode_SMD:D_SMA | D1 |
| 1 | ESP32-C3-MINI-1-N4:E | ESP32-C3-MINI-1-N4:XCVR_ESP32-C3-MINI-1-N4 | U11 |
| 1 | Fuse | Fuse:Fuse_BelFuse_0ZRE0005FF_L8.3mm_W3.8mm | F1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | MCU-ATMEGA2560-16AU_TQFP100_ | MCU-ATMEGA2560-16AU_TQFP100_:TQFP100-0.5-14X14MM | U3 |
| 1 | SW_SPST | Button_Switch_THT:SW_PUSH-12mm | SW1 |
| 1 | XT60-M | XT60-M:AMASS_XT60-M | J24 |
Similar boards
- 2 layers108.2 × 124.9 mm

- 4 layers142.3 × 80.5 mm

Final Version
elshazlio/ecng4504-maze-solver_team_5
ECNG 4504 (AUC, Spring 2026): autonomous maze-learning & solving robot — MCU (Arduino), Python BLE host app, KiCAD/docs, team deliverables. Single monorepo per course charter.
99 partsMIT - 2 layers120 × 100 mm

- 2 layers90 × 80 mm

- 4 layers130.5 × 133 mm

PCB Board
amnxlab/Void-SmartBot
A professionally engineered 4-layer Control PCB for mobile robotics and embedded systems.
48 parts - 2 layers50 × 60 mm

FlightControllerBoard
ToolboxPlane/FlightControllerBoard
A flight controller board for the mini Talon UAV based on a STM32 Nucleo-32.
88 parts3 - 4 layers79 × 76.7 mm

- 2 layers86 × 117 mm

Questions
How big is the Electric AI Wheelchair PCB?
It measures 216.3 × 115.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Electric AI Wheelchair use?
129 parts, built around the ATMEGA2560-16AU, BTS7960B, L298N and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Electric AI Wheelchair KiCad files?
From the prisca7c/Customized-AI-Electric-Wheelchair repository on GitHub, at the commit this page was made from: the board is PCB/Electric AI Wheelchair.kicad_pcb and its schematic PCB/Electric AI Wheelchair.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Electric AI Wheelchair design in my own project?
Its repository states no licence, so its author keeps all rights: ask prisca7c before reusing the design.