Skip to the content
2 layers45 × 45 mmFC V2, the printed circuit board in 3D

STM32F1 based Flight Controller with 9dof IMU (LSM9DS1) and serial 32M Flash

Size
45 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
58
Nets
79
Pads
238
Tracks, vias
546, 72
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Jun 2019
Updated
8 Jun 2019

Overview

FC V2 is an open-source printed circuit board by prashanthmypadi, from the prashanthmypadi/STM32FC repository on GitHub. It is a 2-layer board of 45 × 45 mm with 58 parts on 79 nets, routed with 546 tracks and 72 vias.

It is built around the STM32F103C8T6, CP2102N-EK and AMS1117-3.3, with the LSM9DS1 and BAT54C among its other parts. Its parts include 20 capacitors, 10 resistors, 9 connectors, 6 ICs and 3 diodes. It belongs with the STM32 boards of this library.

Main components

5

README

README.md

STM32FC

STM32F1 based Flight Controller with 9dof IMU (LSM9DS1) and serial 32M Flash. Upto 4 servo outputs. PPM RC input Connectors for external UART and I2C modules. Battery Voltage monitoring.

Parts

58
QtyValueFootprintReferences
11100nCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1, C2, C3, C4, C7, C8, C13, C15, C17, C18, C21
4MountingHoleMountingHole:MountingHole_2.5mmH1, H2, H3, H4
310kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1, R2, R5
31uCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC5, C9, C10
210nCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC20, C22
210uCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC6, C19
21kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR8, R11
2330Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR9, R10
24.7uCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC14, C16
2AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2, U3
122.1kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR6
141.2kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR4
147.5kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR7
1BAT54CPackage_TO_SOT_SMD:SOT-23D1
1BOOTButton_Switch_SMD:SW_SPST_EVQP2SW1
1BattConnector_JST:JST_EH_B02B-EH-A_1x02_P2.50mm_VerticalJ3
1CP2102NPackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU5
1I2CConnector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_VerticalJ9
1LD1LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD3
1LSM9DS1Package_LGA:LGA-24L_3x3.5mm_P0.43mmU6
1M1Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_VerticalJ4
1M2Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_VerticalJ5
1M25PX32Package_SO:SOIJ-8_5.3x5.3mm_P1.27mmU4
1M3Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_VerticalJ6
1M4Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_VerticalJ7
1MS621FBattery:BatteryHolder_Seiko_MS621FBT1
1POWERLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD2
1PPMConnector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_VerticalJ1
1RESETButton_Switch_SMD:SW_SPST_EVQP2SW2
1SG-5032CAOscillator:Oscillator_SMD_SeikoEpson_SG8002LB-4Pin_5.0x3.2mm_HandSolderingX1
1STM32F103C8T6Package_QFP:LQFP-48_7x7mm_P0.5mmU1
1UARTConnector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_VerticalJ8
1USBConnector_USB:USB_Micro-B_Wuerth_629105150521_CircularHolesJ2
1vyoma logologo:VyomaG***

The 57 most common of 58 parts.

Similar boards

  • 2 layers145 × 165 mmBreakpanel, the printed circuit board in 3D

    Breakpanel

    monero-project/kastelo

    The Sekura Monero Hardware Wallet

    690 parts115
  • 4 layers160 × 73.2 mmMainPCB, the printed circuit board in 3D

    MainPCB

    doppelgrau/esp32-f9p-io-board

    An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.

    162 parts39
  • 4 layers29 × 69.8 mmRocketpcb, the printed circuit board in 3D

    Rocketpcb

    sjacksonhodum/projectrocketship

    CAD Files + Code

    69 parts2
  • 2 layers110 × 100 mmPidginTranslator, the printed circuit board in 3D

    PidginTranslator

    DevMubarak1/PidginTranslator

    Handheld translator for Nigerian languages. No internet needed for common phrases, YarnGPT for everything else.

    14 parts21MIT
  • 2 layers54 × 68 mmOpenSTM32F4 LQFP64, the printed circuit board in 3D

    OpenSTM32F4 LQFP64

    phonght32/openSTM32F4_LQFP64

    openSTM32 board using STM32F4 LQFP64 package. This board designed to perform base control for SLAM and Navigation.There are also many availabe connectors that meet many other application requirements.

    77 parts7MIT
  • 4 layers121 × 60 mmAIO438, the printed circuit board in 3D

    AIO438

    ZOUDIO/AIO438

    4x38W amplifier with DSP and BT

    170 parts6GPL-3.0
  • 2 layers45.7 × 60.2 mmPcb watch, the printed circuit board in 3D

    Pcb watch

    nithinmathewjoji/Schrodinger-Clock-PCB-Watch-

    An open-source ESP32-S3-based smartwatch with RTC, I2C display, buzzer, LEDs, and battery monitoring. Designed using KiCad, it features a compact PCB layout, Li-Po battery support, and USB charging

    58 parts4MIT
  • 4 layers48.2 × 54.1 mmESP32, the printed circuit board in 3D

    ESP32

    apoorvarshneya/ESP32_DevBoard

    Designed and developed a custom ESP32 Development Kit from scratch using KiCad, featuring USB-to-Serial programming, 5V-to-3.3V power regulation, reset/boot buttons, LEDs, GPIO headers, and selectable power inputs.

    48 parts

Questions

How big is the FC V2 PCB?

It measures 45 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FC V2 use?

58 parts, built around the STM32F103C8T6, CP2102N-EK, AMS1117-3.3 and LSM9DS1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FC V2 KiCad files?

From the prashanthmypadi/STM32FC repository on GitHub, at the commit this page was made from: the board is STM32FC/FC V2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the FC V2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask prashanthmypadi before reusing the design.