Skip to the content
2 layers14.5 × 17.8 mmUnidirectional Quad MOSFET Motor Driver, the printed circuit board in 3D

Unidirectional Quad MOSFET Motor Driver

prashantbhandary/Unidirectional-Quad-MOSFET-Motor-Driver2

Unidirectional Quad-MOSFET Motor Driver

Size
14.5 × 17.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
14
Pads
36
Tracks, vias
21, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Oct 2025
Updated
5 Oct 2025

Overview

Unidirectional Quad MOSFET Motor Driver is an open-source printed circuit board by prashantbhandary, from the prashantbhandary/Unidirectional-Quad-MOSFET-Motor-Driver repository on GitHub. It is a 2-layer board of 14.5 × 17.8 mm with 16 parts on 14 nets, routed with 21 tracks and 0 vias.

Its parts include 8 resistors, 4 diodes and 4 transistors. It belongs with the robots and motor control boards of this library.

README

README.md

Unidirectional Quad-MOSFET Motor Driver

This repository contains the KiCad project files for a unidirectional quad-MOSFET motor driver PCB. The design provides four MOSFETs arranged to drive a motor in a single direction (useful for simple brushed DC motor control, high-side or low-side switching depending on the schematic), with supporting passive components and connectors.

What’s included

  • Unidirectional Quad-MOSFET Motor Driver.kicad_pro — KiCad project file
  • Unidirectional Quad-MOSFET Motor Driver.kicad_sch — KiCad schematic sheet
  • Unidirectional Quad-MOSFET Motor Driver.kicad_pcb — KiCad PCB layout
  • Unidirectional Quad-MOSFET Motor Driver.kicad_prl — PCB print/plot settings
  • fp-info-cache/ — footprint cache used by KiCad
  • Unidirectional Quad-MOSFET Motor Driver-backups/ — automatic backups exported by KiCad

Note: Filenames are case-sensitive on some platforms. Keep the project files together in the same folder.

Project images

Below are a couple of images included in this folder. They are referenced with relative paths so they render on GitHub and locally.

3D view of the PCB:

3D view of PCB

Main schematic preview:

Schematic preview

Bill of Materials (BOM)

The interactive BOM (ibom) is available in the bom/ folder. View it locally or on GitHub by clicking link below:

Recommended KiCad version

This project was created with KiCad 6.x — KiCad 6 or later is recommended to avoid compatibility issues. If you open the project in an older KiCad version, make a backup first.

How to open the project

  1. Install KiCad (6.x or later): https://kicad.org
  2. Open KiCad and select File > Open Project... and choose Unidirectional Quad-MOSFET Motor Driver.kicad_pro in this folder.
  3. Inspect the schematic first (.kicad_sch), then open the PCB (.kicad_pcb).

Contributing

If you make improvements (BOM, layout changes, footprint fixes, or add gerbers), please contribute back by creating a PR or adding files to this repo.

Contact

Add your name and contact details here if you wish to attribute authorship or allow maintainers to contact you regarding the design.

Author: Prashant Bhandari

Email: info@bhandari-prashant.com.np

Phone: +977 9867756915

Location: Pokhara, Nepal

Website: https://bhandari-prashant.com.np/

Social:

Short bio: Electronics Engineering student (B.E.) specializing in Robotics, PCB design, and embedded systems. See https://bhandari-prashant.com.np/ for full profile and projects.


Parts

16
QtyValueFootprintReferences
4100Resistor_SMD:R_0805_2012MetricR1, R3, R5, R7
410KResistor_SMD:R_0805_2012MetricR2, R4, R6, R8
41N4007Diode_SMD:D_SOD-123D1, D2, D3, D4
4NMOSPackage_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4

Similar boards

  • 2 layers140.5 × 30 mmType e, the printed circuit board in 3D

    Type e

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    16 parts3kApache-2.0
  • 2 layers41.4 × 14.5 mmU2f zero, the printed circuit board in 3D

    U2f zero

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    16 parts2.4k
  • 2 layers122 × 37 mmV0-UmbilicalBoard, the printed circuit board in 3D

    V0-UmbilicalBoard

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    16 parts1.1kGPL-3.0
  • 2 layers152 × 57.6 mmVideoslotadapter, the printed circuit board in 3D

    Videoslotadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    16 parts1kGPL-3.0
  • 2 layers36 × 63.4 mmSmart ringfinal layout, the printed circuit board in 3D

    Smart ringfinal layout

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    16 parts915
  • 2 layers60 × 40 mmHASwitchPlate, the printed circuit board in 3D

    HASwitchPlate

    aderusha/HASwitchPlate

    LCD touchscreen for Home Automation

    16 parts738MIT
  • 2 layers21.1 × 26.9 mmDemo, the printed circuit board in 3D

    Demo

    easyw/kicadStepUpMod

    kicadStepUp: ECAD to MCAD FreeCAD WorkBench

    16 parts704

Questions

How big is the Unidirectional Quad MOSFET Motor Driver PCB?

It measures 14.5 × 17.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Unidirectional Quad MOSFET Motor Driver use?

16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Unidirectional Quad MOSFET Motor Driver KiCad files?

From the prashantbhandary/Unidirectional-Quad-MOSFET-Motor-Driver repository on GitHub, at the commit this page was made from: the board is Unidirectional Quad-MOSFET Motor Driver.kicad_pcb and its schematic Unidirectional Quad-MOSFET Motor Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Unidirectional Quad MOSFET Motor Driver design in my own project?

Its repository states no licence, so its author keeps all rights: ask prashantbhandary before reusing the design.