Skip to the content
2 layers95 × 97.5 mmAnalog Project PLL, the printed circuit board in 3D

Design and implementation on PCB of a phase locked loop.

Size
95 × 97.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
50
Pads
117
Tracks, vias
174, 12
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Jan 2026
Updated
14 Jan 2026

Overview

Analog Project PLL is an open-source printed circuit board by Pranay-Patil2006, from the Pranay-Patil2006/Phase-Locked-Loop-project repository on GitHub. It is a 2-layer board of 95 × 97.5 mm with 35 parts on 50 nets, routed with 174 tracks and 12 vias.

Its parts include 13 resistors, 9 connectors, 6 ICs, 5 capacitors and 1 diode.

README

README.md

Phase-Locked-Loop Project

Design and implementation on PCB of a phase-locked loop


Summary

Designed, simulated, and validated a discrete analog Phase-Locked Loop (PLL) implemented on PCB using a CD4046 phase detector, discrete op-amps, and passive/active loop-filter components. The design was optimized to minimize phase jitter and maximize capture and lock range, with close agreement between simulation and hardware measurements.


Key Contributions

  • Loop design & analysis: Derived loop-filter values from the closed-loop transfer function; verified lock time and stability margins using time-domain analysis.
  • Simulation strategy: Performed LTSpice transient simulations and parameter sweeps to evaluate capture range, locking behavior, and sensitivity to component variations.
  • Jitter reduction tactics: Reduced jitter through optimized loop bandwidth selection, low-noise op-amp choice, VCO linearization, proper supply decoupling, and careful PCB routing of phase detector and VCO control nodes.
  • Validation: Conducted testbench measurements of lock acquisition and short-term phase stability to confirm simulation trends and guide final component tuning.

Block Diagram

Simple block diagram of the circuit

Credits: https://electronicscoach.com/phase-locked-loops.html


Results

  • Measured capture/lock range: 150Hz - 1300Hz

Parts

35
QtyValueFootprintReferences
7Conn_01x01_SocketConnector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_VerticalJ1, J2, J4, J5, J7, J8, J9
4LM741Package_DIP:DIP-8_W7.62mmU2, U3, U4, U5
333nCapacitor_THT:CP_Radial_D12.5mm_P7.50mmC1, C2, C3
2100kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR5, R6
2120kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR9, R10
2200nCapacitor_THT:CP_Radial_D12.5mm_P7.50mmC4, C5
269kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR3, R4
11800kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR7
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
12N7000Package_TO_SOT_THT:TO-92_InlineQ1
14046Package_DIP:DIP-16_W7.62mmU1
1475kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR2
147kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR13
1600kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1
168.4kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR12
174LS76Package_DIP:DIP-16_W7.62mmU6
182kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR11
1900kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR8
1Conn_01x02_SocketConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ6
1Conn_01x03_SocketConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ3

Similar boards

  • 2 layers97.2 × 59.1 mmArmLEDsPrototype, the printed circuit board in 3D

    ArmLEDsPrototype

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    35 parts915
  • 2 layers62 × 42 mmMod cell 0 02, the printed circuit board in 3D

    Mod cell 0 02

    Green-bms/SmartBMS

    Open source Smart Battery Management System

    35 parts756
  • 2 layers75 × 26 mmDIY detector electron variant, the printed circuit board in 3D

    DIY detector electron variant

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    35 parts558BSD-2-Clause
  • 2 layers45 × 25 mmReCamera Basically Board, the printed circuit board in 3D

    ReCamera Basically Board

    Seeed-Studio/OSHW-reCamera-Series

    reCamera is a series of open-source AI cameras.

    35 parts495Apache-2.0
  • 2 layers160.8 × 24.4 mmHUD VID RCD PANEL, the printed circuit board in 3D

    HUD VID RCD PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    35 parts431
  • 2 layers75 × 50 mmBackplane tester, the printed circuit board in 3D

    Backplane tester

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    35 parts397Apache-2.0
  • 2 layers50 × 20.5 mmOtterIron PRO Top, the printed circuit board in 3D

    OtterIron PRO Top

    Jana-Marie/Otter-Iron-PRO

    USB-PD soldering station for JBC C245 handles.

    35 parts321
  • 2 layers50.5 × 67.1 mmHackheld Vega, the printed circuit board in 3D

    Hackheld Vega

    SpacehuhnTech/HackHeld

    Hackable Handheld

    35 parts277

Questions

How big is the Analog Project PLL PCB?

It measures 95 × 97.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Analog Project PLL use?

35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Analog Project PLL KiCad files?

From the Pranay-Patil2006/Phase-Locked-Loop-project repository on GitHub, at the commit this page was made from: the board is Analog_Project_PLL/Analog_Project_PLL.kicad_pcb and its schematic Analog_Project_PLL/Analog_Project_PLL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Analog Project PLL design in my own project?

Its repository states no licence, so its author keeps all rights: ask Pranay-Patil2006 before reusing the design.