2 layers19 × 76 mm
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0
2 layers33 × 31.8 mm
Pepega v.01
practable/pocket-vna-one-portOne-port experiments with the pocket vector network analyser
- Size
- 33 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 7
- Pads
- 34
- Tracks, vias
- 43, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Oct 2021
- Updated
- 9 Apr 2026
Overview
Pepega v.01 is an open-source printed circuit board by practable, from the practable/pocket-vna-one-port repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 33 × 31.8 mm with 15 parts on 7 nets, routed with 43 tracks and 0 vias.
Its parts include 5 connectors, 4 capacitors, 4 resistors and 2 ICs.
README
hardware/README.mdThe files in this subdirectory were supplied by Maksim Kuznetcov
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1 uf | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C1, C3 |
| 2 | 1 uf | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C2, C4 |
| 2 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R3 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R4 |
| 2 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3, J4 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J5 |
| 2 | LM317L_TO92 | Package_TO_SOT_THT:TO-92_Inline | U1, U2 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
Questions
How big is the Pepega v.01 PCB?
It measures 33 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pepega v.01 use?
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pepega v.01 KiCad files?
From the practable/pocket-vna-one-port repository on GitHub, at the commit this page was made from: the board is hardware/pepega v.01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pepega v.01 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers26.7 × 62.2 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm
Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm
BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm
Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 2 layers20.3 × 15.2 mm
L0 Load
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
15 parts546MIT - 2 layers68 × 50 mm
EleLab v2 PowerFeed
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
15 parts531GPL-3.0 - 2 layers50.8 × 35.6 mm
