2 layers20.3 × 15.2 mm
EncoderBoard
practable/digger-nidec
Digger experiment with nidec motor (spoiler alert - contains friction!)
5 partsAGPL-3.0
2 layers12.8 × 12.8 mm
EncoderBoard IG
practable/digger-nidecDigger experiment with nidec motor (spoiler alert - contains friction!)
- Size
- 12.8 × 12.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 2
- Nets
- 5
- Pads
- 10
- Tracks, vias
- 15, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Nov 2021
- Updated
- 18 Nov 2021
Overview
EncoderBoard IG is an open-source printed circuit board by practable, from the practable/digger-nidec repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 12.8 × 12.8 mm with 2 parts on 5 nets, routed with 15 tracks and 0 vias.
README
README.mddigger-nidec
Digger experiment with nidec motor (spoiler alert - contains friction!)
WARNING: This repository contains the early development stages of a remote lab that was never put into full production or testing. You are recommended to use the updated version of the Spinning Disk experiment available at spinner-amax.
PCB
PCB files are for a version of the PCB intended to work for a number of different hardware setups and used for the Spinner experiment spinner-nidex and therefore does not represent the best design for the Digger alone. There is currently no PCB design for the Digger experiment specifically.
UI
This version of the UI is an early production version written with Vue 2. The same UI is used for the digger-nidec, governor-nidec and spinner-nidec experiments. In the App.vue file one line of code will need to be changed depending on which experiment you are running:
remoteLabVersion: 'spinning_disk', // or 'robot_arm' or 'variable_governor'
The UI was only ever put into production and tested with the Spinner hardware and development was stopped on the others before they were at a deployable stage. This means that there is no guarantee that the Digger or Governor versions of the UI will work. The UI has been fully upgraded Vue 3 and updated in the spinner-amax repository.
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x05_Horiz | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x05_Vert | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J1 |
Questions
How big is the EncoderBoard IG PCB?
It measures 12.8 × 12.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EncoderBoard IG use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EncoderBoard IG KiCad files?
From the practable/digger-nidec repository on GitHub, at the commit this page was made from: the board is hw/pcb/EncoderBoard/EncoderBoard_IG.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EncoderBoard IG design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from practable/digger-nidec
1Similar boards
- 2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0 - 2 layers33 × 19 mm
- 2 layers
Diode template
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
2 parts547GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 button
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
2 parts546MIT - 2 layers35.1 × 46.8 mm
SDEX2M2 Breakout Board
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
2 parts542GPL-3.0 - 2 layers59.3 × 36.6 mm
ExpansionBoardTemplate
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
2 parts459GPL-3.0 - 2 layers
Alpha.9mm.wire
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
2 parts410 - 2 layers26.7 × 64 mm
