2 layers63 × 84.8 mm
SeniorProjectRev1
power-analyzer/hardware
This is the hardware and microcontroller software component of Ryan Rabello and Nathan Zimmerly's senior project.
80 parts
2 layers73.7 × 55.1 mm
SeniorProjectRev2
power-analyzer/hardwareThis is the hardware and microcontroller software component of Ryan Rabello and Nathan Zimmerly's senior project.
- Size
- 73.7 × 55.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 112
- Nets
- 67
- Pads
- 254
- Tracks, vias
- 593, 81
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 Feb 2018
- Updated
- 11 Jun 2018
Overview
SeniorProjectRev2 is an open-source printed circuit board by power-analyzer, from the power-analyzer/hardware repository on GitHub. It is a 2-layer board of 73.7 × 55.1 mm with 112 parts on 67 nets, routed with 593 tracks and 81 vias.
It is built around the CD74HC4067SM96G4. Its parts include 51 resistors, 17 capacitors, 16 connectors, 3 ICs and 1 fuse.
Main components
1README
README.mdHardware
This is the hardware and microcontroller software component of Ryan Rabello and Nathan Zimmerly's senior project.
Getting Started
The PCB folder is a KiCAD project. Once this is done,
Prerequisites
KiCAD and PlatformIO using either Visual Studio Code or Atom.
Authors
Nathan Zimmerly and Ryan Rabello.
Acknowledgments
OpenEnergyMonitor
Parts
112| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | TEST | Measurement_Points:Measurement_Point_Round-TH_Small | GND1, I0, I1, I2, I3, I4, I5, I6, I7, I8, I9, I10, I11, I12, I13, I14 +4 |
| 15 | 100k | Resistors_SMD:R_0805 | R10, R12, R14, R19, R21, R23, R28, R30, R32, R37, R39, R41, R46, R48, R50 |
| 15 | 10u | Capacitors_SMD:C_0805 | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17 |
| 15 | 42.4 | Resistors_SMD:R_0805 | R7, R8, R9, R16, R17, R18, R25, R26, R27, R34, R35, R36, R43, R44, R45 |
| 15 | 83.3k | Resistors_SMD:R_0805 | R11, R13, R15, R20, R22, R24, R29, R31, R33, R38, R40, R42, R47, R49, R51 |
| 15 | Jack-DC | rev2Library:AUDIO-JACK-TRRS-SMD-2 | J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J16 |
| 4 | MountingHole_2.2mm_M2_DIN965_Pad | Mounting_Holes:MountingHole_2.2mm_M2_DIN965_Pad | , , , |
| 3 | 3.8k | Resistors_SMD:R_0805 | R1, R2, R3 |
| 2 | 50k | Resistors_SMD:R_0805 | R5, R6 |
| 1 | .01u | Capacitors_SMD:C_0805 | C1 |
| 1 | .1u | Capacitors_SMD:C_0805 | C2 |
| 1 | 101 | Resistors_SMD:R_0805 | R4 |
| 1 | CD74HC4067SM96G4 | Housings_SOIC:SOIC-24W_7.5x15.4mm_Pitch1.27mm | U1 |
| 1 | Conn_01x03 | PCB Revision 1:CONN_TERM_BLOCK | J1 |
| 1 | Fuse | rev2Library:fuse-rev2 | F1 |
| 1 | WeMos_mini | wemos_d1_mini:D1_mini_board | U2 |
| 1 | xl-007-power-supply | rev2Library:DAOKI-Power-Supply | U3 |
More from power-analyzer/hardware
1Similar boards
- 2 layers98 × 71 mm
Mozc dial
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
112 parts3kApache-2.0 - 2 layers100 × 100 mm
- 2 layers237.5 × 102.9 mm
Instruction
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
112 parts301Unlicense - 2 layers224.6 × 73.2 mm
Keyboard ch552-48-lpr
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware
112 parts236 - 2 layers277.2 × 107.5 mm
Corne V4 Pro Micro Edition
klouderone/CorneV4ProMicroEdition
The Corne V4 with Pro Micro Micocontrollers, made specifically for beginners and support for wireless microcontrollers
112 parts208CC-BY-4.0 - 2 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers96 × 71.6 mm
A2DVI.v1.6
rallepalaveev/A2DVI
This is based on Clintech Pico Board (CPB) with 48 GPIOs, most 5V tolerant.
112 parts82MIT
Questions
How big is the SeniorProjectRev2 PCB?
It measures 73.7 × 55.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SeniorProjectRev2 use?
112 parts, built around the CD74HC4067SM96G4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SeniorProjectRev2 KiCad files?
From the power-analyzer/hardware repository on GitHub, at the commit this page was made from: the board is PCB Revision 2/SeniorProjectRev2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SeniorProjectRev2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask power-analyzer before reusing the design.