

Io board
Homebrew CPU project
- Size
- 100 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 127
- Pads
- 415
- Tracks, vias
- 1,272, 36
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Oct 2019
- Updated
- 1 Jul 2020
Overview
Io board is an open-source printed circuit board by pottsali, from the pottsali/cpu-pub repository on GitHub. It is a 2-layer board of 100 × 75 mm with 10 parts on 127 nets, routed with 1,272 tracks and 36 vias.
Its parts include 7 connectors and 3 ICs.
README
README.mdMUPS/16 Homebrew CPU project
This is public repo for files from the MUPS/16 homebrew CPU project. Please see http://mups16.net for details.
Files
Schematics
Currently I've only uploaded the schematics for the PCBs here, and will add more as I complete the last few bits. Most of the schematics are documented on the MUPS/16 website.
Others
I have a few other sets of files to clean up and upload:
- A gate-level simulation of the whole system in Digital format
- Microcode generation, for the control ROMs
- An assembler
- A very basic monitor to test the system
These are not yet in a fit state to upload, but I will add them as I clean them up.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x40_Female | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J101, J102, J103, J105, J106, J107 |
| 3 | PCA9698DGG,518 | SamacSys_Parts:SOP50P810X120-56N | IC101, IC102, IC103 |
| 1 | Conn_01x07_Female | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J104 |
More from pottsali/cpu-pub
7- 2 layers150 × 300 mm

- 4 layers150 × 150 mm

- 4 layers200 × 50 mm

- 4 layers200 × 50 mm

- 4 layers100 × 40 mm

- 2 layers200 × 270 mm

- 2 layers88.9 × 47 mm

Similar boards
- 2 layers57 × 55.2 mm

LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm

Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm

Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm

- 2 layers44.3 × 30.5 mm

Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm

Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm

Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the Io board PCB?
It measures 100 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Io board use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Io board KiCad files?
From the pottsali/cpu-pub repository on GitHub, at the commit this page was made from: the board is schematics/mups16/backplanes/io_board/io_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Io board design in my own project?
Its repository states no licence, so its author keeps all rights: ask pottsali before reusing the design.