
Synchro2
waynegramlich/synchro_drive_motor_driver_pcb
Dual motor drive for dual motor synchro drive PCB

PARTS hobby servo controller project
Parts servo is an open-source printed circuit board by portlandrobotics, from the portlandrobotics/btServo repository on GitHub. It is a 2-layer board of 37.3 × 17.5 mm with 50 parts on 44 nets, routed with 539 tracks and 41 vias.
It is built around the AS5050 AB and MCP1703-3302E/CB. Its parts include 22 capacitors, 11 resistors, 4 ICs, 3 inductors and 2 transistors. It belongs with the robots and motor control boards and the nRF52 and nRF5x boards of this library.
PARTS hobby servo controller project
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | parts_servo:0402-B | C20, C50, C51, C53, C203 |
| 5 | 2.2 | parts_servo:0402-B | R102, R111, R112, R121, R122 |
| 4 | 1uF | parts_servo:0402-B | C2, C102, C110, C120 |
| 2 | 1 | parts_servo:0402-B | R110, R120 |
| 2 | 10uF 10V | parts_servo:0805-B | C100, C101 |
| 2 | 4.7K (np) | parts_servo:0402-B | R21, R22 |
| 2 | 8pF | parts_servo:0402-B | C60, C61 |
| 2 | M01 | parts_servo:SMDMOTOR | JP1, JP3 |
| 2 | NFET-DUAL | parts_servo:PMDPB28UN | Q110, Q120 |
| 1 | 0.001uF | parts_servo:0402-B | C52 |
| 1 | 0.0022uF | parts_servo:0402-B | C70 |
| 1 | 0.047uF | parts_servo:0402-B | C54 |
| 1 | 1.5pF | parts_servo:0402-B | C75 |
| 1 | 10nH | parts_servo:0402-B | L70 |
| 1 | 120 (np) | parts_servo:0402-B | R20 |
| 1 | 15 | parts_servo:0402-B | R201 |
| 1 | 16MHz | parts_servo:CRYSTAL-3.2X2.5(4_TERMINAL) | X60 |
| 1 | 1pF | parts_servo:0402-B | C74 |
| 1 | 1uF 10V | parts_servo:0402-B | C1 |
| 1 | 2,2pF | parts_servo:0402-B | C72 |
| 1 | 3.3nH | parts_servo:0402-B | L73 |
| 1 | 4.7nH | parts_servo:0402-B | L71 |
| 1 | 4u7 | parts_servo:0402-B | C204 |
| 1 | ANT1 | parts_servo:TESTPOINT-(1X1)CREAMED | TP1 |
| 1 | ANT_FEED | parts_servo:TESTPOINT-(1X1)CREAMED | TP2 |
| 1 | AS5050 | parts_servo:AS5050 | U200 |
| 1 | Input | parts_servo:SMD_1X4_HEADER | JP2 |
| 1 | MCP1703-3302 | parts_servo:MCP1703 | U1 |
| 1 | NRF51822 | parts_servo:NRF51822 | U50 |
| 1 | POT | parts_servo:SMD_1X3_PADS | JP5 |
| 1 | RT9625A | parts_servo:QFN-16(4X4)+EP | U100 |
| 1 | SWD | parts_servo:SMD_1X3_PADS | JP4 |
| 1 | np | parts_servo:0402-B | C71 |

waynegramlich/synchro_drive_motor_driver_pcb
Dual motor drive for dual motor synchro drive PCB


Nicolboy/KICAD-C2000-float-flyback
Alimentation flyback isolée et flottante 200kHz (11-25V→5,5-13V/3A) pour chauffage filament tube + préampli bas bruit — KiCad 10.




hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
It measures 37.3 × 17.5 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the AS5050 AB and MCP1703-3302E/CB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the portlandrobotics/btServo repository on GitHub, at the commit this page was made from: the board is hardware/kicad/parts_servo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask portlandrobotics before reusing the design.