Skip to the content
2 layers50 × 51 mmSTEP200-switch id shield, the printed circuit board in 3D

STEP200-switch id shield

ponoor/step200-switch-id-sheild1

A small PCB design for adding home switch inputs and a dip switch to X-NUCLEO-IHM02A1

Size
50 × 51 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
33
Pads
94
Tracks, vias
111, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
25 Mar 2024
Updated
26 Mar 2024

Overview

STEP200-switch id shield is an open-source printed circuit board by ponoor, from the ponoor/step200-switch-id-sheild repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 51 mm with 13 parts on 33 nets, routed with 111 tracks and 0 vias.

Its parts include 9 connectors and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

step200-switch-id-sheild

A small PCB design for adding home switch inputs and a dip switch

Parts

13
QtyValueFootprintReferences
4Conn_01x03Connector_JST:JST_XA_B03B-XASK-1_1x03_P2.50mm_VerticalJ5, J7, J8, J9
2Conn_01x08Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ1, J2
1Arduino_LeonardoModule:Arduino_UNO_R3A1
1Conn_01x06Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ3
1Conn_01x10Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalJ4
1Conn_02x04_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalJ6
1Jumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmJP1
1LOGOLocal_Library:ponoor_full_21x6G***
1SW_DIP_x04Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mmSW1

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the STEP200-switch id shield PCB?

It measures 50 × 51 mm and has 2 copper layers, 1.6 mm thick.

What parts does the STEP200-switch id shield use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STEP200-switch id shield KiCad files?

From the ponoor/step200-switch-id-sheild repository on GitHub, at the commit this page was made from: the board is STEP200-switch-id-shield.kicad_pcb and its schematic STEP200-switch-id-shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the STEP200-switch id shield design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).