Skip to the content
2 layers27 × 106 mmControl, the printed circuit board in 3D

Kicad schematics and PCB layout for an 8 channel ADSR based on CEM3310/AS3310

Size
27 × 106 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
12
Pads
38
Tracks, vias
31, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
6 Nov 2021
Updated
6 Nov 2021

Overview

Control is an open-source printed circuit board by polykit, from the polykit/adsr-3310-8 repository on GitHub. It is a 2-layer board of 27 × 106 mm with 25 parts on 12 nets, routed with 31 tracks and 0 vias.

Its parts include 6 resistors and 1 connector. It belongs with the audio and music boards of this library.

README

README.md

Polykit ADSR-3310-8

Here you can find Kicad schematics and PCB layout for an 8 channel ADSR based on the CEM3310/AS3310 integrated circuit. It has a separate control board for all 4 parameters and offers gate and trigger input and CV output. Power is supplied by standard +12V/-12V Eurorack connector.

ADSR-3310-8 PCB

BOM

Calibration

ADR

Leave 3310 ICs out and turn attack, decay and release control to maximum. Adjust trimpots until you measure -240mV on all three test points to ground.

Timing

References

https://www.synthxl.com/wp-content/uploads/2018/04/Crumar-Trilogy-Schematic.pdf#page=13

https://www.vintagesynthparts.com/wp-content/uploads/2016/08/Crumar-Stratus-Service-Manual.pdf#page=14

http://www.muzines.co.uk/articles/electro-music-engineer-cem-3310/3647

https://www.alfarzpp.lv/eng/sc/AS3310.pdf

https://datasheetspdf.com/pdf-file/104287/ETC/CEM3310/1

Parts

25
QtyValueFootprintReferences
13LOGOPolykit:star-silk-tinyG***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***
31k8Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR15, R16, R17
22kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R18
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1ATTACK 10kPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_VerticalRV4
1CONTROLConnector_Molex:Molex_KK-254_AE-6410-06A_1x06_P2.54mm_VerticalJ1
1DECAY 10kPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_VerticalRV5
1LOGOPolykit:bär-smallG***
1RELEASE 10kPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_VerticalRV6
1SUSTAIN 10kPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_VerticalRV7

More from polykit/adsr-3310-8

1
  • 2 layers98.5 × 132.5 mmAdsr-3310-8, the printed circuit board in 3D

    Adsr-3310-8

    polykit/adsr-3310-8

    Kicad schematics and PCB layout for an 8 channel ADSR based on CEM3310/AS3310

    151 parts14

Similar boards

  • 2 layers159.5 × 30 mmType f, the printed circuit board in 3D

    Type f

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    25 parts3kApache-2.0
  • 2 layers113.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    25 parts2.1k
  • 2 layers58.4 × 114.3 mmPicoPedal, the printed circuit board in 3D

    PicoPedal

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    25 parts915
  • 2 layers54 × 15 mmXyp gpib, the printed circuit board in 3D

    Xyp gpib

    xyphro/UsbGpib

    Versatile, cheap and portable USB to GPIB converter (USBTMC class based)

    25 parts690MIT
  • 2 layers50 × 76 mmVoron 0, the printed circuit board in 3D

    Voron 0

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    25 parts397Apache-2.0
  • 2 layers237.5 × 102.9 mmStorage, the printed circuit board in 3D

    Storage

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    25 parts301Unlicense
  • 2 layers43.3 × 21 mmNanoS3 Carrier, the printed circuit board in 3D

    NanoS3 Carrier

    UnexpectedMaker/esp32s3

    Assorted files for my ESP32-S3 development boards

    25 parts296

Questions

How big is the Control PCB?

It measures 27 × 106 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Control use?

25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Control KiCad files?

From the polykit/adsr-3310-8 repository on GitHub, at the commit this page was made from: the board is control/control.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Control design in my own project?

Its repository states no licence, so its author keeps all rights: ask polykit before reusing the design.