2 layers82 × 58 mm
2 layers63.2 × 39.1 mm
FuncGen
poly-electronics/utilPCB5Useful electronic PCB designs with KiCad 6
- Size
- 63.2 × 39.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 24
- Pads
- 71
- Tracks, vias
- 102, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Dec 2022
- Updated
- 8 Dec 2022
Overview
FuncGen is an open-source printed circuit board by poly-electronics, from the poly-electronics/utilPCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 63.2 × 39.1 mm with 25 parts on 24 nets, routed with 102 tracks and 0 vias.
Its parts include 7 capacitors, 5 resistors, 4 connectors, 1 IC and 1 switch.
README
README.mdutilPCB -- Useful electronic PCB designs with KiCad 6.
Purpose
utilPCB are a collection of useful electronic PCB designs.Content
- USBasp:
AVR microcontrollers USB programmer with ZIF socket.
- FuncGen:
Function generator based on XR2206.
- YX-360TR:
Analog multimeter (Sanwa YX-360TR clone).
- Dualvoltsrc:
Dual voltage linear adjustable power supply.
- Amplifier150w:
150W RMS MOSFET amplifier.Requeriments
KiCad 6 (https://www.kicad.org/)How to use
1. Unpack the archive `tar xzvf <archive>.tar.gz` which `archive`
is the selected design.
2. Go to the design subdirectory (`cd <archive>/`).
3. Open KiCad 6. Click *File -> Open Project* and browse the
`*.kicad_pro` file.License
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved. This file is offered as-is,
without any warranty.Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 3 | 5K1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R5 |
| 2 | 100K | Potentiometer_THT:Potentiometer_Piher_T-16H_Single_Horizontal | RV2, RV3 |
| 2 | 100n | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C2, C4 |
| 2 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3, C7 |
| 1 | 100u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 150p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C6 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 1n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C5 |
| 1 | 50K | Potentiometer_THT:Potentiometer_Piher_T-16H_Single_Horizontal | RV1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | OUTPUT | Connector_Audio:rca_yellow | J4 |
| 1 | POWER | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW1 |
| 1 | XR2206CP-F | Package_DIP:DIP-16_W7.62mm_Socket | U1 |
Questions
How big is the FuncGen PCB?
It measures 63.2 × 39.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FuncGen use?
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FuncGen KiCad files?
From the poly-electronics/utilPCB repository on GitHub, at the commit this page was made from: the board is FuncGen/FuncGen.kicad_pcb and its schematic Amplifier150w/amplifier150w.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FuncGen design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from poly-electronics/utilPCB
4- 2 layers96.5 × 71.1 mm
- 2 layers102.1 × 87.4 mm
- 2 layers77 × 53.6 mm
Similar boards
- 2 layers159.5 × 30 mm
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
25 parts3kApache-2.0 - 2 layers113.5 × 95.1 mm
Sweep high
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
25 parts2.1k - 2 layers75 × 30 mm
- 2 layers58.4 × 114.3 mm
PicoPedal
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
25 parts915 - 2 layers54 × 15 mm
Xyp gpib
xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)
25 parts690MIT - 2 layers50 × 76 mm
- 2 layers237.5 × 102.9 mm
Storage
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
25 parts301Unlicense - 2 layers43.3 × 21 mm
