8051 leds

my8051

This project contains my experimental FPGA code aiming to program an 8051 software core with several peripherals on the Colorlight 5A-75B board using the Lattice ECP5 FPGA.

The r8051.v and instruction.v is the Verilog source code for an 8051 core, by Li Xinbing released under the Apache 2.0 Licence

The main Verilog module is top.v. test.v is the Icarus Verilog testbench.

The 8051_leds/ directory contains a KiCad project for a small addon board that plugs on the HUB75 header. It's angled so that its parallel with the main PCB.

tools/bin2memh.py is a script that can convert a file to a hex file that is loaded with $readmemh directive. This is not an Intel HEX format.

Currently the project stalled as the core seems to take every jump ;)

Requisites

The code has been tested with Yosys suite for compilation for ECP5. The makefile uses Icarus Verilog for simulation

You need SDCC assembler for 8051 (sdas8051) to assemble the test listings. You can also assemble them by hand.

Copying

Unless otherwise stated, the files are

Copyright 2022 polprog

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.