2 layers56 × 65 mm
SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
24 parts2.4kMIT
2 layers28.7 × 51.1 mm
ESP Pump Interface
pmamatis/ESP32_waterpump_interfaceA small project for an ESP32-doit-devKi-V1 to expose 4 GPIOs to BJTs in order to switch external 5V powerlanes driven by USB-C
- Size
- 28.7 × 51.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 39
- Pads
- 100
- Tracks, vias
- 92, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Jun 2024
- Updated
- 26 Jul 2024
Overview
ESP Pump Interface is an open-source printed circuit board by pmamatis, from the pmamatis/ESP32_waterpump_interface repository on GitHub, published under the MIT licence. It is a 2-layer board of 28.7 × 51.1 mm with 24 parts on 39 nets, routed with 92 tracks and 0 vias.
Its parts include 10 resistors, 4 diodes, 4 transistors, 1 IC and 1 connector. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.
README
README.mdESP32_waterpump_interface
A small project for an ESP32-doit-devKi-V1 to expose 4 GPIOs to BJTs in order to switch an external 5V powerlane driven by USB-C
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R4, R6, R8 |
| 4 | 2N2219 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q2, Q3, Q4 |
| 4 | 500 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3, R5, R7 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Pump1, Pump2, Pump3, Pump4 |
| 4 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4 |
| 2 | 5k1 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9, R10 |
| 1 | DOIT-ESP32-DEVKIT-V1 | ESP32-DEVKIT-V1:MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
Questions
How big is the ESP Pump Interface PCB?
It measures 28.7 × 51.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP Pump Interface use?
24 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP Pump Interface KiCad files?
From the pmamatis/ESP32_waterpump_interface repository on GitHub, at the commit this page was made from: the board is PCB/ESP-Pump-Interface.kicad_pcb and its schematic PCB/ESP-Pump-Interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP Pump Interface design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 2 layers58 × 35.5 mm
- 2 layers144 × 58 mm
Breakout 80pin 1393476-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
24 parts1.2k - 2 layers21.6 × 19.5 mm
Micron Logo LED
DraftShift/StealthChanger
Tool changing system for Vorons and other front mount printer motion systems, not just stealthburner.
24 parts1.2kGPL-3.0 - 2 layers158 × 11 mm
Rainbow Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
24 parts1.1kGPL-3.0 - 2 layers85.6 × 54 mm
TRACED wio1262-carrier
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
24 parts915 - 2 layers36 × 20 mm
