

Door v1.3
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 12
- Pads
- 76
- Tracks, vias
- 145, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 19 Dec 2014
- Updated
- 7 Mar 2019
Overview
Door v1.3 is an open-source printed circuit board by pmacik, from the pmacik/electronics repository on GitHub. It is a 2-layer board with 21 parts on 12 nets, routed with 145 tracks and 0 vias.
Its parts include 6 connectors, 5 resistors, 3 capacitors, 2 diodes and 2 switches.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | C2 | C1, C2, C3 |
| 3 | 1M | R4-LARGE_PADS | R3, R4, R5 |
| 2 | R | R4-LARGE_PADS | R1, R2 |
| 2 | Val** | pad | Ref**, Ref** |
| 1 | ARDUINO_MINI | arduino_mini | U1 |
| 1 | Bell | PIN_ARRAY_2X1 | P3 |
| 1 | Bell Test | SW_PUSH_SMALL | SW2 |
| 1 | Cubieboard | PIN_ARRAY_4x1 | P1 |
| 1 | Door Open | PIN_ARRAY_2X1 | P4 |
| 1 | Emergency open | SW_PUSH_SMALL | SW1 |
| 1 | GREEN_LED | LED_3MM | D2 |
| 1 | RED_LED | LED_3MM | D1 |
| 1 | Servo | PIN_ARRAY_3X1 | P2 |
| 1 | Servo Ext PWR | PIN_ARRAY_2X1 | P6 |
| 1 | Servo PWR Jmpr | PIN_ARRAY_3X1 | P5 |
More from pmacik/electronics
9- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

Similar boards
- 2 layers28.3 × 39.8 mm

LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm

- 2 layers45.5 × 42.9 mm

Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm

Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm

QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm

- 2 layers161.3 × 111.8 mm

Questions
What parts does the Door v1.3 use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Door v1.3 KiCad files?
From the pmacik/electronics repository on GitHub, at the commit this page was made from: the board is KiCad/devconf2015-door/door_v1.3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Door v1.3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask pmacik before reusing the design.