2 layers
2 layers
DH11-I2C
pmacik/electronics1- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 30
- Pads
- 46
- Tracks, vias
- 49, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Dec 2014
- Updated
- 7 Mar 2019
Overview
DH11-I2C is an open-source printed circuit board by pmacik, from the pmacik/electronics repository on GitHub. It is a 2-layer board with 7 parts on 30 nets, routed with 49 tracks and 0 vias.
It is built around the DHT11. Its parts include 3 resistors, 2 ICs, 1 capacitor and 1 connector.
Main components
1Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Discret:R3-LARGE_PADS | R2, R3 |
| 1 | 100n | Discret:C2 | C1 |
| 1 | 4k7 | Discret:R3-LARGE_PADS | R1 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Angled_1x04 | P1 |
| 1 | DHT11 | Pin_Headers:Pin_Header_Angled_1x04 | U2 |
| 1 | arduino_mini | Libraries:arduino_nano | U1 |
More from pmacik/electronics
9- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
Similar boards
- 2 layers96.6 × 82.8 mm
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5
Questions
What parts does the DH11-I2C use?
7 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DH11-I2C KiCad files?
From the pmacik/electronics repository on GitHub, at the commit this page was made from: the board is KiCad/dht11-i2c/DH11-I2C.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DH11-I2C design in my own project?
Its repository states no licence, so its author keeps all rights: ask pmacik before reusing the design.