pluggee/R10011DRV8825 Based Stepper Motor Driver
R1001 is an open-source printed circuit board by pluggee, from the pluggee/R1001 repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 51 × 34.3 mm with 50 parts on 49 nets, routed with 552 tracks and 65 vias.
It is built around the DRV8825PWP, ZXCT1107SA and 74LS157PC, with the RC0603FR-0710KL, CC0603KRX7R9BB104 and CC0603KRX5R6BB105 among its other parts. Its parts include 21 resistors, 9 capacitors, 4 ICs, 2 connectors and 1 transistor. It belongs with the robots and motor control boards and the Silicon Labs (EFR32, EFM) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | RC0603FR-0710KL | Main:RESC0603 | R1, R2, R6, R7, R10, R11, R12, R13, R14, R16, R17 |
| 6 | FIDTOP001 | Main:FIDTOP001 | FID1, FID2, FID3, FID4, FID5, FID6 |
| 4 | CC0603KRX7R9BB104 | Main:CAPC0603 | C1, C5, C7, C12 |
| 4 | TestPoint | Main:TestPoint000 | TP1, TP2, TP3, TP4 |
| 3 | CC0603KRX5R6BB105 | Main:CAPC0603 | C9, C14, C112 |
| 2 | RC0603FR-07100KL | Main:RESC0603 | R120, R121 |
| 2 | RC0603FR-071KL | Main:RESC0603 | R8, R19 |
| 2 | RC0603FR-072K8L | Main:RESC0603 | R4, R18 |
| 2 | RHC2512FTR250 | Main:RESC2512 | R5, R9 |
| 2 | SOCKMALE_02x03 | Main:SOCKET127P-02X03 | JMASTER1, JSLAVE1 |
| 1 | 47uF | Capacitors_SMD:c_elec_8x6.5 | C3 |
| 1 | 74LS157 | Main:SOP65P620X530X200-16 | U2 |
| 1 | ART | pluggee:pluggeeLabsIcon-11x6 | A1 |
| 1 | CC0603KRX7R9BB103 | Main:CAPC0603 | C10 |
| 1 | CONN_01X04 | Main:70553-0038 | J2 |
| 1 | DRV8825 | Main:SOP65P970X440X120-28NT518X310 | U1 |
| 1 | EFM8BB10F8G | Main:QFN50P300X300X75-20NT170X170 | U3 |
| 1 | ERJ-8CWFR050V | Main:RESC1206 | R15 |
| 1 | PCIEXPRESS-X1 | Main:PCIEXPRESS-X1 | J1 |
| 1 | Q_NMOS_GSD | Main:SOT190P290X130X100-3 | Q1 |
| 1 | RC0603FR-071ML | Main:RESC0603 | R3 |
| 1 | ZXCT1107 | Main:SOT190P290X130X100-3 | U4 |
It measures 51 × 34.3 mm and has 4 copper layers, 1.6 mm thick.
50 parts, built around the DRV8825PWP, ZXCT1107SA, 74LS157PC and RC0603FR-0710KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pluggee/R1001 repository on GitHub, at the commit this page was made from: the board is pcb/R1001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
AndrewCraswell/agency
Native KiCad engineering prototype, separate from the earlier ESP32/tscircuit board. Open usb-scoring-platform.kicadpro in KiCad 10; schematic and PCB are the editable source, with no generator required.
limmjacc/custom-wireless-mouse
Project to track the hardware and firmware for a custom made computer mouse.
iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.
aliaksei-lameyka/ENKU-Base-reader
Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.
heimdall-suite/heimdall-switch
Wireless power switch node for RC vehicles, part of the Heimdall Suite.
jonahsaunders/planar-studio
KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.